FlatRacer BMW Airhead Boxer 30mm spanner tool set - BMW /5 fork bottom nuts

FlatRacer BMW Airhead Boxer 30mm spanner tool set (hex + box spanners)

FlatRacer BMW Airhead Boxer 30mm spanner tool set - BMW /5 fork bottom nuts

Designed and developed by us to enable secure and easy tightening and undoing of all the BMW Airhead Boxer /5 Series (69-73) 30mm fork bottom nuts.

This set includes our 30mm heavy duty hex spanner spanner and our chrome-vanadium 13mm angled box spanner, essential tools to access and remove the BMW /5 (69-73) fork bottom nuts and bolts.

Our heavy duty 30mm spanner tool is designed to be to provide the maximum contact area to these thin section nuts, something most spanners and sockets cannot do due to their chamfered edges. Our spanner provides a safe and optimised access to all the BMW /5 forks 30mm bottom nuts . 

The spanner measures circa 180mm in total length thus enabling it to be fitted in the original tool roll. Provision to fit a 1/2" drive breaker bar or torque wrench is provided, along with a small semi-circular cut out to enable it to be hanged centered on a tool wall/board.

This tool is made of heavy duty 6mm flat thick steel, developed with a flank drive so it does not damage the nuts' edges as force is applied to the centre section of the hex sides, not the corners.

Our chrome-vanadium angled box spanner very usefully allows the insertion of an Allen key to access the forks bottom bolts. This is a much safer, easier and elegant solution to work on these forks opposed to some improvised solutions (ie: 13mm socket held by vice grips!).

IMPORTANT: Care should be exercised when handling as this is an heavy tool. Personal protection equipment is recommended when handling it (ie: gloves and steel toe cap shoes).

Similar spanner tools available for other sizes including the 36mm nuts, the later post 1985 (Monolever) 41mm fork top nuts and the steering bearing castellated nut adjuster. Please see our other listings.

Earn 0 reward points
£0.00 £34.99
Out Of Stock
Add To Wishlist