Ceriani replica cast alloy headlight brackets - satin black

Ceriani replica black cast alloy headlight brackets - UNIVERSAL FIT

Ceriani replica cast alloy headlight brackets - satin black

Very period looking and a close replica of the old Ceriani cast alloy headlight pegs. finished in a very attractive satin black finish, ideal for those seeking an all-black look for their Cafe Racer projects.

UNIVERSAL FIT

Will fit fork stanchion with diameters of 35mm and 38 using the supplied plastic spacers plus 41mm without spacers. It can be made to suit other sizes by tweaking the spacers or using rubber sleeves trimmed to size.

Headlight mounting holes of 10mm.

IMPORTANT:

1 - If fitting to the BMW Airhead Boxer stanchions, minor modifications may be required. For the models with 36mm fork stanchions (/5, /6, /7 & R45/65) we would suggest using the supplied 38mm plastic spacers and then cut to size a sleeve of 1mm thin rubber strip (ie: old inner tube for example).

2 - These brackets are longer than the original BMW pegs thus the headlight will stand out slightly more out of the frame.

3 - This set of pegs will suit headlights with M8 or M10 mounting pivot bolts. It is however possible to re-drill the LH to accept the BMW 22m ignition switch (/6 & /7 models) but bear in mind that this will weaken the peg and great care should be exercised when tightening the headlight in place. Please note that this type of modification is not covered against manufacturing faults.