BMW Monolever Triple Clamp kit

FlatRacer BMW R2v Airhead Boxer Monolever (1985 on) triple clamp kit. 

This kit features:

  • FlatRacer billet alloy triple clamp / top yoke - brushed satin anodised alloy finish - BMW Monolever (Oct 1985 - 1996)
  • FlatRacer pair of stainless steel/bronze fork pre-load adjusters with counter lock rings, complete with black nylon spacers
  • FlatRacer polished s/s fork top washers
  • FlatRacer s/s top steering nut and 16mm enamel BMW badge. 

Our billet alloy triple clamp is made of aero grade T6 alloy, milled and machined to our unique specifications. We've designed it to match in looks the lower yoke and offer superior performance. Its weight alone testifies the sturdiness of the design, with over 600gr. Out triple clamp is finished in a long lasting anodised satin brushed alloy finish with our logo discreetly etched at the front.

This exquisite triple clamp will help increase significantly the torsional rigidity of the telescopic forks and provide positive location and parallelism. 

Its underside thick cross beam section apes the original lower yoke for extra strength and torsional rigidity, unlike any other clamp on the market place.

Our triple clamp will allow you to slide through the fork stanchions thus enabling you to lower the front end, if required.

The stainless steel & phosphorous bronze fork pre-load adjusters allow fine tuning for the suspension pre-load according to the roads ridden and riding style.

This kit represents outstanding value for money, with a significant saving over its individually sold items.

Fits all the BMW Monolever Series models, made after October 1985 to 1996 fitted with the original 38.5mm fork stanchions. 

NB: Our fork pre-load adjusters fit only the later type of Monolever forks, with the fork top spigots held by a circlip. It does NOT fit the early Monolever forks (September 1984-September 1985) fitted with M34 threaded fork top spigots.

Outstanding quality and finish, performance, longevity, sturdiness and timeless classic period look.


1 - Suitable only for use with clip on handlebars. However, if you wish to use yoke mounted handlebars and risers, our triple clamp yoke can be easily drilled/milled by a competent local machinist to you.

2 - If using the original BMW headlight pegs, these may need trimming to clear the thicker triple clamp.

3 - The 16mm BMW enamel badge has a 3M adhesive backing. However, to ensure proper and safe fit, the nut recess surfaces needs to be thoroughly cleaned and de-greased. We strongly recommend that you also apply a tiny drop of superglue or similar applied to the badge backing.

Outstanding period look, sturdiness, quality and durability. 

Similar kit also available for the earlier twin shock models models (/5, /6 & /7 Series), please see our other listings.

Earn 0 reward points
£0.00 £314.99
Out Of Stock
Add To Wishlist