BMW R90S fairing upper fitting kit

FlatRacer BMW R90S, R100S & R100CS cockpit fairing stainless steel upper fitting kit 


FlatRacer BMW R2v Airhead Boxer R90S R100S & R100CS cockpit fairing stainless steel upper fitting kit

This kit includes:

  • FR BMW R90S cockpit fairing inner s/s small angled brackets (pair) + required s/s M6 fasteners
  • BMW R90 cockpit fairing small rubber grommets (pair) for angle brackets + s/s M6 bushes
  • FR BMW R90S cockpit fairing tubular s/s brackets (pair) + required s/s M6 fasteners
  • FR BMW R90S cockpit fairing yoke mounted flat s/s brackets (pair) + required s/s M6 fasteners
  • Stainless steel M6 long bolts + washers & nyloc nuts  - these locate the flat brackets on the yoke plate 


This kit replace the often damaged and rusty R90S/100S/cs fairing upper fitting components, giving a new lease of life and tidying up an highly visible area. Offered here as a complete fitting kit, offering over 15% saving over individually sold items.

Fits all the original BMW R90S, R100S and R100 CS cockpit fairings and all BMW /6 & /7 Series (73-84) fitted with the original 36mm fork stanchions.

The kit will also fit the Monolever (post 1985) models with different top shackle (flat) brackets. If you have this model, please choose it on our options box.

OPTIONS:

1 - Kit designed to fit the BMW R90|S, R100\S, R100CS plus all /6 (73-76) and /7 Series (76-84)

2 - Kit designed to fit the BMW Monolever models (85-96)


IMPORTANT: 

1 - Kit designed to fit ONLY the original fairings (and our own replicas fairing kits) that have present the inner M6 mounting lugs. 

2 - The correct fitting of these cockpit fairing kits requires the use of the original headlight pressed steel pegs locking in place the correct longer S type indicators stalks and associated fittings for this fairing (please see our lower fitting kit and original & alternative pegs)

3 - This kit fits only the R90S, /6, /7 & Monolever models. It will NOT fit the R45/65 models (78-84) nor will the later Paralever and GS models.


We can also supply a R90S type or the later /7 polished stainless steel top yoke plate (4mm thick) and other components to tidy up the top yoke are such as our FR s/s steering top centre nut and fork pre-load adjusters (handlebar adjustments may be required). Please see our other listings or contact us for further info and advice.

We build to order our own BMW R90S complete fairing kit including all the required fittings. Please check our other listings.



Earn 0 reward points
£0.00 £79.99

Model fit

QTY:
Out Of Stock
Add To Wishlist