We are closed until the 28 February, orders will be shipped once we re-open. Thank you.

BMW Monolever Series (1985 on) stainless steel top yoke Set

FlatRacer BMW Airhead Boxer R2v Monolever Series (1985 on) stainless steel top yoke Set


FlatRacer BMW Airhead Boxer R2v Monolever Series (1985 on) stainless steel top yoke Set

This Set features:

  • FlatRacer BMW Monolever polished stainless steel replica top yoke plate (4mm)
  • FlatRacer BMW Monolever polished stainless steel fork top nuts
  • FlatRacer s/s top steering nut and 16mm enamel BMW badge. 


Outstanding period look, sturdiness, quality and durability.

Our FR stainless steel top yoke plate is a direct replacement of the original which will accept the BMW headlight pegs/handlebar risers and instruments' bracket. 

The polished stainless steel fork top nuts are a direct replacement of the original nuts, often rusted and damaged (not uncommon seeing chisel mark on them) and the plastic top caps (often missing). These fit onto the original BMW Monolever fork top spigots, exactly the same way as the original nuts.

The low profile top nuts allows the fitting of the original yoke mounted handlebars without any adjustments required, unlike our for pre-load adjusters.

The FlatRacer BMW R2v polished stainless steel top yoke centre top nut is also a direct replacement of the often damaged/rusty original. Our nut has however been modified in its design to integrate a machined recess that  allows the fitting of our supplied 16mm BMW enamel badge (not cheap plastic). It also features a centre hole for the bikes equipped with the original BMW steering damper and its adjuster knob.

The stainless steel construction of all the kit components will ensure a corrosion free finish and ease of maintenance.

This Set represents outstanding value for money, with a significant saving over its individually sold items.

Fits all the BMW Monolever models including the R65, R80 and the R100 made after October 1985 and 1996, with fork top spigots held by a circlip. 

It will NOT fit the early BMW Monolever forks (09/84-10/85) with thread M34 fork top nuts.

Please also note that this kit will not fit the later Paralever models such as GS, R100R and Mystic.


IMPORTANT

1 - The 16mm BMW enamel badge has a 3M adhesive backing. However, to ensure proper and safe fit, the nut recess surfaces needs to be thoroughly cleaned and de-greased. We strongly recommend that you also apply a tiny drop of superglue or similar applied to the badge backing.

2 - Fits all the BMW Monolever models made after October 1985, with fork top spigots held by a circlip. It will NOT fit the early BMW Monolever forks (09/84-10/85) with threaded M34 fork top nuts.

 

Similar kit also available with our new Monolever fork pre-load adjusters, please check out other listings.

Earn 0 reward points
£0.00 £134.99
QTY:
Out Of Stock
Add To Wishlist