We are away until the 7th November, orders will be shipped once we re-open. Thank you.

BMW Airhead Boxer 6" stainless steel rear mudguard

FlatRacer BMW Airhead Boxer 6" (flatter centre) stainless steel rear mudguard


FlatRacer BMW Airhead Boxer 6" (flatter centre) stainless steel rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for our tail kits, the FlatRacer and Giuliari replica seats.

Very high quality stainless steel mudguard made with strong gauge material (thick), highly polished, carefully trimmed and drilled. Manufactured for us in Continental Europe, you will not find better (we know, we searched high and low for a good supplier).

This stainless steel mudguard is circa 6" wide with a flat centre profile. The standard (Medium) overhang at the rear is circa 120mm.

We can supply a longer (Long) rear mudguard, with circa 300mm rear overhang (measured along its outer curvature, after the rear sub-frame tubing rear most point) at additional cost. Please see our options box.

OPTIONS:

1 - Medium size rear mudguard (circa 120mm rear overhang)

2 - Long size rear mudguard (circa 300mm rear overhang)


Our rear mudguards have six point fixing as per the original. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. 

Slightly narrower with a more rounded profile 5" rear s/s mudguard also available at the same cost, please check our other listings.

Depending on out stocks, we might have available a lighter alloy version, if you prefer it, please contact us for availability.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. We can prepare this mudguard to fit the /5, /6 & /7 Series (70-84), the R56/65 models (78-84) and the Monolever Series (85-96). Please specify your bike model and year and if still fitted with the original sub-frame.


IMPORTANT: 

1 - Please specify your model and year when ordering as these are individually trimmed and prepared to your specific bike.

2 - Our rear mudguards are concentric in shape whist the original BMW mudguard is oval in shape thus our mudguard has a different radii relative to the rear wheel. This is due being concentric and being limited in positioning by the original front mounting points and battery tray. This is not overly noticeable, especially when the original side panels are fitted.

3 - These mudguard are made to order to fit each specific bike model. Depending our our work schedule, please do allow us between 1-2 weeks to have it ready. \please do contact us for the latest delivery estimate.


NB: We can pre-fit one of our tail lights, including drilling the rear mudguard to accept it (inclusive of rubber wiring grommet if applicable).  If fitting a larger rear tail light (L564, L679 etc) to the rear mudguard, we would suggest using a LONG rear mudguard. Please check our other listings or contact us for more details.

Earn 0 reward points
£0.00 £199.99

Size

QTY:
Out Of Stock
Add To Wishlist