BMW /5, /6 & /7 (70-84) Triple Clamp

FlatRacer BMW R2v /5, /6 & /7 Series (70-84) billet alloy triple clamp


This sales includes:

 1 x FlatRacer billet alloy triple clamp / top yoke - brushed satin anodised alloy finish


Our billet alloy triple clamp will help increase the torsional rigidity of the telescopic forks and provide positive location and parallelism. Its underside thick cross beam section apes the original lower yoke for extra strength. This is a feature no other aftermarket triple clamp for these bikes include, either in Europe or USA.

Incredibly strong, over 600gr of tough T6061 aero grade alloy, anodised in satin bushed alloy for a tough, corrosion free, long lasting working life

Replaces the original 4mm steel top yoke plate, often rusted/distorted. Straight fit, as per the original plate. 

Allows the fork stanchions to slide through unlike the original top yoke plate thus enabling you to lower the front end if required.

Fits all the BMW /5, /6 & /7 Series models, made between 1970-1984 fitted with the original 36mm fork stanchions.

It will NOT fit the R45/65 models nor the later Monolever/Paralever Series.


IMPORTANT: 

1 - Suitable only for use with clip on handlebars. However, if you wish to use yoke mounted handlebars and risers, our triple clamp yoke can be easily drilled and tapped.

2 - If using the original BMW headlight pegs, these may need trimming to clear the thicker triple clamp.


Similar kit also available for the post 1985 BMW Monolever models, please see our other listings.

Part of our Triple clamp kit which also includes our fork pre-load adjusters, s/s for top washers and s/s steering stem top centre s/s nut w/ BMW 16mm enamel badge. Please check our other listings.

Earn 0 reward points
£0.00 £159.99
QTY:
Out Of Stock
Add To Wishlist