We are away until the 23rd February, orders will be shipped once we re-open. Thank you.

BMW R90S & /7 Series (73-84) seat cover s/s hold trims set

FlatRacer BMW R90S & /7 Series (76-84) dual seat (cowl type) s/s seat cover hold trims set


FlatRacer BMW R2v Airhead Boxer R90S & /7 Series (76-84) dual seat (cowl type) stainless steel seat cover holding trims set

This sale includes:

  • 1 x FlatRacer BMW /7 S/RS/RT cowl dual seat replica s/s seat cover holing trim set (10 items)

 

We've developed and produced this set of seat cover holding trims, made of stainless steel 0.8mm plate to use on our own seats (see our other listings). 

These trims are often missing from previous repair or seat cover replacements and are quite hard to find in good, usable condition plus being zinc plated steel originally, also tended to rust notoriously.

This set is a direct copy of the original and fit exactly as per the manufacturers (BMW/Denfeld) specifications. 

Designed to fit the very popular and common dual seat fitted a separate cowl, first seen on the BMW R90S. This seat was later adopted for the /7 Series, usually fitted to the S, CS, RS & RT.

Fits all the BMW R90S & later /7 Series models equipped with the cowl dual seat. Please check photos.

This seat was commonly fitted to the later R90S (74-76) and later RS, S & RT models but this type of seat will fit any post 1976 to 1984 BMW /7 Series. Please look carefully at the above photos including of the seat and bikes commonly fitted with it and check that this set of holding trims will suit your seat.

Very useful item that allows you to restore the original seat, keeping your bike's authenticity.

Complete repair kits that also includes an excellent replacement seat foam and fully assembled high quality seats are also available, please check our other listings.

IMPORTANT:

1 - Fitting these seat covers requires a certain degree of knowledge and skill. If you are not comfortable with this type of work, we would suggest entrusting the job to a competent local trimmer to you, versed in motorcycle seat repair work. If you need advice, please do contact us as we've built and repaired 100's of seats over the years and found all kind of challenges so we should be able to help.

2 - This set is fitted using 4mm or 3.2mm alloy (or stainless) rivets, which are NOT included in this sale.


We also sell replacement stainless steel hinges, locking spigots, rubber stops, polished alloy trims, s/s fasteners,  etc. Please check our other listings or contact us for more details.

We will very gladly combine shipping costs, please contact us prior to purchase and payment for an accurate quote.

Earn 0 reward points
£0.00 £39.99
QTY:
Out Of Stock
Add To Wishlist