FlatRacer BMW R90S replica cockpit fairing - FULL KIT

FlatRacer BMW R2v Airhead Boxer R90S R100S & R100CS replica cockpit fairing - FULL kit 

The iconic BMW R90S cockpit fairing can be considered the first cockpit fairing to be fitted on a mass produced motorcycle from the manufacturer, it inspired countless designs including Guzzi LeMans, Kawasaki Z1R, Suzuki GS1000S etc, etc.

This FlatRacer BMW R90S replica cockpit fairing kit is designed to fit any BMW R2v Airhead Boxer  /6 and /7 Series (1973-1984) and to be as near bolt on as possible, following closely the original design.  

This kit includes:

• FR BMW R90S replica cockpit fairing - NEW & IMPROVED version - mould injected composite - will also fit post 81 models
• BMW OEM fairing/headlight rubber seal
• BMW OEM black plastic cockpit dash
• BMW OEM dash stickers including extra/alternative LH type
• BMW OEM acrylic screen care clear sticker
• FR BMW R90S clear screen - standard size - pre-drilled
• Screen edge rubber trim
• 11 x M4 s/s screen csk bolts, conical s/s washers, s/s small M4 penny washers + nyloc nuts + rubber spacers
• FR BMW R90S cockpit fairing inner s/s small angled brackets (pair)  + required s/s M6 fasteners
• BMW R90 cockpit fairing small rubber grommets (pair) for angle brackets + s/s bushes
• FR BMW R90S cockpit fairing tubular s/s brackets (pair) + required s/s M6 fasteners
• FR BMW R90S cockpit fairing yoke mounted flat s/s brackets (pair) + required s/s M6 fasteners
• Stainless steel M6 long bolts + washers & nyloc nuts  - locate the flat brackets on the yoke plate 
• BMW OEM headlight pegs - black powder coated stamped steel
• BMW OEM headlight pegs rubber spacers (4)
• BMW OEM stainless steel S type (long) indicator stalks (pair)
• BMW OEM indicator stalks metal C washers (pair)
• BMW OEM indicator stalks metal spacers (pair)
• BMW OEM 22mm eccentric rubber cone spacers (allows fine lower adjustment of the fairing)
• BMW OEM indicator stalks large rubber washers (pair)
• BMW OEM clock + voltmeter sub-loom

Our new & improved mould injected composite fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a smooth inner surface, just like the original fairing. Built with out usual attention to details so no air bubbles, cracks, frayed edges etc. Minimal preparation work is required prior to painting.

Our fairing follows very closely the lines of the original fairing unlike most replicas on the market. All the parts are pre-drilled, pre-trimmed and pre-mated so very little preparation work is required to fit apart from painting.

We've adopted the original inner fairing fastening set up, albeit using nylon lugs with a captive M6 brass nut, therefore much stronger than the original fairing,  a refined solution rarely adopted due to the complexity and extra labour required. 

Our kit includes a standard size, clear acrylic screen, pre-trimmed and drilled. Other optional tint and/or flip up screens are also available, please see options below. This kit includes a brand new BMW original dashboard. 

Originally the screen was riveted to the fairing/dash using a special setting tool, requiring specific (and expensive) brass bushes and plastic rivets. Although quite neat, it was not a practical solution if the screen or dash needed to be removed for replacement or fairing repair. 

We've replaced these troublesome original screen fasteners with our own stainless steel M4 csk bolts and some very neat and elegant s/s conical cup washers plus penny washers to spread the load, rubber washers to reduce vibrations and abrasions and nyloc nuts for a secure screen fitting. We include an extra fastener to keep as a spare in case you loose any of the fiddly items.

This kit is the most complete you will find and does includes all the essential parts to fit this fairing to an original R90S, /6 or the later /7 Series. It also includes a BMW OEM electrical sub-loom in order to fit the original BMW/Motometer voltmeter and clock (as fitted to the later RS, RT and CS models). If required, we can supply alternative clock and voltmeter to suit this application. Please check our other listings or contact us for more details.

Where possible, fittings have been upgraded to stainless steel to minimise the risk of corrosion and ease of maintenance such as the upper fitting kit, fasteners and indicator stalks.

Outstanding period look, sturdiness, quality and durability.

This kit will fit the BMW R90S, R100S, R100 CS and all /6 & /7 Series (73-84) fitted with the original 36mm fork stanchions and low rise handlebar. 

Can be made to fit the later Monolever (post 1985) with different top brackets (available at no extra cost). Please indicate your bike model and year at the checkout so we can ensure we will send you the correct parts.

NB: Our fairing has been subtly altered to also fit the post 81 models (or earlier converted bikes) fitted with handlebar mounted brake master cylinders. Please do contact us for more details, if required.

OPTIONS:

1 - Light grey tint screen - pre-trimmed & drilled

2 - Dark grey tint screen - pre-trimmed & drilled

3 - Flip up (3cm taller) clear screen - pre-trimmed & drilled

4 - Flip up (3cm taller) light grey tint screen - pre-trimmed 

5 - Flip up (3cm taller) dark grey tint screen - pre-trimmed 

IMPORTANT:

1 - This fairing requires the use of low rise handlebars, as fitted to the R90S. We've now produced our own version of the original R90S handlebar, with the all important 22.0mm diameter. We also can supply our slightly wider Euro bar. Please check our other listings.

Partial kits for bikes already fitted with the original headlight pegs or other components are also available, please check our other listings or contact us with your requirements.

Similar kit available for the Monolever (post 1985) models. Please contact us for more details as some fittings vary.

We can also supply very nice replicas of the original clamp on stem plastic indicators, suitable for this fairing. Please check our other listings or contact us.

For those wishing to further improve and tidy their bikes, we can supply a R90S type or the later /7 polished stainless steel top yoke plate (4mm thick) and other components to tidy up the top yoke are such as our FR s/s steering top centre nut and fork pre-load adjusters (handlebar adjustments may be required). Please see our other listing or contact us for further info and advice.

Our FR BMW R90S full cockpit fairing kit is very possibly the best replica kit on the market place and certainly the most complete, which bolts and fits in place like the original kit, for that authentic look. The best way to attain that iconic R90S look.