FlatRacer BMW R90S cockpit fairing kit - BASIC

FR BMW R90S cockpit fairing kit - BASIC

FlatRacer BMW R90S cockpit fairing kit - BASIC


FlatRacer BMW R90S cockpit fairing kit - BASIC

The iconic BMW R90S cockpit fairing, the first fairing to be fitted on a mass produced motorcycle from the manufacturer, it inspired countless designs including Guzzi LeMans, Kawasaki Z1R, Suzuki GS1000S etc, etc.

This FlatRacer BMW R90S replica cockpit fairing kit is designed to fit any BMW R2v /6 and /7 Series plus Monolevers (correct brackets supplied at no extra cost) and to be as near bolt on as possible, following closely the original design. It comprises:  

 

  • FR BMW R90S replica cockpit fairing - NEW & IMPROVED version - mould injected composite fairing (smmoth inner surfaces) 
  • BMW OEM black plastic cockpit dash
  • FR BMW R90S black dash warning stickers incl. extra/alternative LH side
  • FR BMW acrylic screen care clear sticker
  • FR BMW R90S clear screen - standard size - pre-drilled
  • Screen lower edge rubber trim
  • 11 (one extra) x M4 s/s screen csk bolts+conical s/s washers, s/s small penny washers + nyloc nuts + rubber spacers
  • FR BMW R90S cockpit fairing inner s/s small angled brackets (pair)  + required s/s M6 fasteners
  • BMW OEM small rubber grommets (pair) for angle brackets + s/s bushes
  • FR tubular s/s brackets (pair) + required s/s M6 fasteners
  • FR top yoke (flat) s/s brackets (pair) + required s/s M6 fasteners
  • Stainless steel M6 long yoke locating bolts + washers & nyloc nuts  


Our new and improved FR R90S cockpit fairing is a faithful replica, made of mould injected composite plastic, stronger than the crack prone originals. It is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a smooth surface inside, just like the original fairing. Built with our usual attention to details so no air bubbles, cracks, frayed edges etc. 

All the parts are pre-drilled, pre-trimmed and pre-mated so very little preparation work is required to fit apart from painting.

We've adopted the original inner fairing fastening set up, albeit using nylon lugs with a captive M6 brass nut, therefore much stronger than the original fairing,  a refined solution rarely adopted due to the complexity and extra labour required. 


NB: This new fairing has been revised and its design very subtly altered so it will also fit the post 81 models fitted with bar mounted brake master cylinders.


IMPORTANT: This kit includes only the upper fairing mounting set.

This fairing requires the use of the original BMW R90S handlebar or similar size (22mm) low rise handlebar.


OPTIONS: We offer several acrylic screen options including light or dark grey tint and also flip up (taller type for more wind protection). Please check our options box.


We offer several other options for headlight pegs including the original type, indicator lower mounting stalks, the lower fittings, dashboard, headlight rubber seal, voltmeter & clock, wiring sub-loom, handlebars and many other parts to cater for several different set ups, budgets and requirements. Please check our other listings or contact us through info@flatracer.com


Earn 0 reward points
£0.00 £529.99

Colour

QTY:
Out Of Stock
Add To Wishlist