Latest projects

New Products

FlatRacer BMW billet alloy triple clamp / top yoke

After a long gestation period and several prototypes later, here it is our new FlatRacer billet alloy triple clamp / top yoke. Beautifully machined out of aero grade T6 alloy, it mimics to perfection the cast alloy look of the lower original yoke. Its hard anodized brushed finish ensures minimal maintenance and outstanding resistance to corrosion and elements.

Extraordinarily strong, sturdy and heavy, it weighs 629gr (slightly less for the Monolevers) thanks to its chunky cross clamps bridge that provides the required torsional rigidity, a notoriously weak point on telescopic forks such as the ones fitted the the BMW R2v Series.

Outstanding period look, quality and durabilty, designed to fit all BMW R2v /7 Series made between 1974 and 1984 and also for the later post 1985 Monolevers (please indicate year of your bike when ordering). Part of our top yoke kit, see below.

£149.99

FlatRacer BMW /6 & /7 top yoke kit

FlatRacer BMW /6 & /7 top yoke kit

Comprising of our new billet alloy triple clamp, stainless steel/bronze fork pre-load adjusters complete with black nylon spacers plus our ever so popular stainless steel top steering nut and 16mm enamel BMW badge.

The billet alloy triple clamp will help increase the torsional rigidity of the telescopic forks and provise positive location and parallelism. The fork pre-load adjusters allow fine tuning for the suspension pre-load according to the roads ridden and riding style.

This kit represents outstanding value for money, with a significant saving over its individually sold items.

£259.99

FlatRacer BMW 70-84 ignition coil kit

Our newly designed FlatRacer BMW 70-84 ignition coil kit replaces the often tired and failing dual 6v original Bosch/BMW igntion coils and HT leads/spark plug caps fitted on the BMW /5, /6 and /7 Series made between 1970 and 1984.

Our kit includes an uprated dual output 12v igntion coil with the correct resistance (can also be used with the electronic igntion systems fitted on the 81-84 bikes), HT leads and Champion or NGK resistor spark plug caps.

The kit also includes our own stainless steel bracket and short wiring plus the required stainless stell fasteners for a straight and easy swap and fit.

Excellent value for money, outstanding performance and a considerable saving over the original items.

£89.99

FlatRacer BMW Monolever & R45/65 (post 1981) igntion coil kit

Our newly designed FlatRacer BMW Monolever & R45/65 Series (post 1981) ignition coil kit replaces the often cracked and failling Bosch single electronic coil.

Our kit includes an uprates dual output 12v igntion coil with the correct resistance that offers outstanding performance and longevity.

The kit also includes our own stainless steel bracket and short wiring plus the required stainless stell fasteners for a straight and easy swap and fit. HT leads are not included but available separately if required along with spark plugs etc.

Excellent value for money, outstanding performance and a considerable saving over the original item.

£79.99

FlatRacer BMW short sub-frame kit

We have designed and developed this short sub-frame kit incorporating our own seat that locks and hinges like the originals. Will it fit the all the BMW twin shock models including the /5, /6, /7 and R45/65 series made between 1970 and 1984. It includes:

  • FR short sub-frame
  • Upper shock absorbers mounting stainless steel fasteners
  • Offset RH lower shock mounting stud and s/s M10 nyloc nut + washer
  • Sub-frame mounting stainless steel fasteners
  • Fitted and adjusted rubber stops for the seat (bolt on)
  • FR Short seat – upholstered in pleated dark chocolate brown or black
  • Removable mid seat strap (bolt on)
  • FR stainless steel seat hinges (pair) + stainless steel fasteners
  • BMW OEM seat clocking spigot + conical rubber stop, s/s half + washer

    • Other items ara available to compliment this kit such as mudguards, fork brace kits, tail lights, indicators etc. Please click More info for further details.

£749.99

BMW /5 SWB Cafe Racer seat kit - Giuliari

Cafe Racer seat, replica of the Seventies Giuliari BMW Sports seat, Very attractive and evocative design, this seat has proved very popular over the years with Cafe Racer enthusiasts.

Designed to fit the early BMW /5 Series SWB (short frame) allied to our 5.75" stainless steel mudguard and our FlatRacer/Lucas L564 tail light combo (included in this kit).

We've included other items and options that can be added to this kit including a matching front mudguard, please click on the More info button on the left for further details.

£299.99

FlatRacer BMW R2v 70-84 Urban Scrambler kit

After many requests from our customers who after building a Cafe Racer, yearned for something different, practical and more comfortable, we've designed an Urban Scrambler kit for the BMW R2v Series.

Designed to fit all BMW /6 and /7 Series (74-84, please specify your model), it features:

  • FlatRacer BMW short sub-frame kit
  • FlatRacer fork brace kit w/ 5" s/s front mudguard
  • FlatRacer 5.75" s/s medium rear mudguard (other options availalable)
    • We've included other items and options that can be added to this kit including other lights, indicators, bars etc. Alternative kits for other models available. Please click More info.

£699.99

BMW Bing air intake alloy trumpets

Alloy bellmouths designed to fit the BMW R2v Bing CV 32mm and 40mm carburettors.

These are ideal if your engine is tuned for performance, particularly so if using a high lift, long duration camashaft as the trumpets/bellmouths will enable quicker combustion chamber filling at higher rpm. If fitting to a standard tune engine, some loss of low engine speed tractability may expected.

Please note that these bellmouths offer less filtration than the original air filter and K&N replacements hence engine wear can be exarcebated when fitting these trumpets. Please also note that re-tuning the engine may be required (carburation/ignition).

NB: Carburettors and other ancillaries are NOT included in this sale, for illustration purposes only.

£84.99

Dell Orto BMW pre-81 carburettor conversion kit

After many requests from our customersand subsequent sales, we've decided to assemble a complete and ready to fit Dell Orto PHM38 carburettor kit as fitted to the iconic BMW R90S, fames for its outstanding performance.

This kit comprises a new pair of Dell Orto PHM38 (40mm available as special order, at additional cost), stainless steel head stubs, BMW plastic inlet tracts and rubber sleeves, throttle cables (2) and choke cables (2) and K&N air filter. We can pre-fit manual choke levers on the carbs at no extra cost thus eliminationg the cables. Please do let us know if you prefer this option.

It will fit straight onto BMW R75, R80, R90 and R100 models made up to September 1980 (Please state your bike model and year when ordering). Kits are also available for later models although minor mods are required, please do contact us for more details.

£749.99

FlatRacer BMW Daytona tail kit

We are quite keen in short and sleek cafe racers but not so keen cutting up and weld frames. We have developed this short tail kit, featuring an elegant and sporty tail section, upholstered to our usual standards that will offer a really nice period Cafe Racer look, similar to the Norton Commando, without altering the BMW rear sub-frame.

This kit incorporates the tail itself and an upholstered seat base, fixed by 8 stainless steel fasteners and finished with our trademark polished alloy trim. This kit is built to our usual high standards and sturdiness, complemented with our new 5.75" stainless steel rear mudguard (six point fixing) that includes our own FlatRacer-Lucas L679 alloy tail light, all pre-trimmed, pre-drilled and prepared to fit straight on the BMW /7, R45/65 & Monolevers.

We've included other items and options that can be added to this kit including matching front mudguard, please click on the More Info button on the left for further details.

£399.99

FlatRacer BMW R2v fork brace kit - 4.5" stainless steel mudguard

Similar to our other fork braces albeit incorporating our new 4.5" short stainless steel front mudguard, pre-trimmed and pre-drilled, includes all the necessary stainless steel fastners and rubber washers.

Designed to fit BMW R /6 & /7 fitted made between 1973 to 1984 (please specify your bike model and year when ordering). It is very sturdy and proven design that will enhance the roadholding qualities of your BMW. This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs. Made of thick steel and powder coated for a long life.

Can be made to fit the Monolever models with some minor mods. Similar version also available for the R45/65 Series. Please contact us or click More info for further details.

Currently unavailable

FlatRacer BMW K Series Aero cap kit

We are big admirers of the K series, Edgar has riden over 300.000 miles in several of these models. We were never happy with the original fuel tank cap notwitstanding its obvious quality and functionality. We've now developed our own Aero cap kit for these BMW K series tanks, emulating the 80/90's racing bikes set up.

It comes complete with our own developed adaptor plate, the aero cap outer ring and quick detach cap plus all the necessary stainless steel fasteners. Straight swap, using the original rubber seal.

We can also supply the original BMW rubber seal if required for an additional £10.00. Please contact us prior to your order and we shall add it to you order.

We are developing a lockable version that we hope to have soon for sale. Please contact us for more details.

Out of stock