Cafe Racers

Mobile visitors

____________

Our website uses Adobe Flash which may limit browsing on Android and other Mobile devices.

For full browsing and shopping capabilities, please install Adobe Flash Player

Contact us!

FlatRacer BMW Daytona tail kit

FlatRacer BMW Daytona tail kit

We are quite keen in short and sleek cafe racers but not so keen cutting up and welding frames.

Whit this mission, we have developed this FlatRacer BMW R2v Cafe Racer Daytona short tail kit, as fitted on our FlatRacer Mancha Branca project. It s designed to fit all /7 Series (76-84) and can also be fitted to R45/65 and Monolever frames with minor modifications. The kit features an elegant and sporty tail section, upholstered to our usual standards that will result in a really nice period Cafe Racer look, without altering the original BMW rear sub-frame. It comprises:

  • FlatRacer Daytona GRP tail section, pre-trimmed and drilled
  • Upholstered seat base, black vinyl, pre-fitted w/ s/s fasteners
  • Seat base polished alloy trim - pre fitted w/ s/s fasteners
  • FlatRacer 6" stainless steel rear mudguard
  • FlatRacer L679 alloy tail light assembly, pre-fitted w/ s/s fasteners
    • This kit incorporates the tail itself and an upholstered seat base, fixed by 8 stainless steel fasteners and finished with our trademark pleated black heavy duty vinyl seat cover and pre-fitted polished alloy trim. The foam has the correct shape and density for comfort and good ergonomics.

      The tail section is built according to our usual standards, it is extra strong (4-6mm thick) in the seat area. It includes our own upgraded stainless steel hinge, zinc plated steel locking rod and its conical rubber stop, plus two front rubber stops. It includes all the necessary fasteners.

      The seat base is pre-trimmed and drilled and fitted with rivnuts, enabling to be bolted or separated from the tail section quite easily.

      The kit is complemented with our new 6" stainless steel rear mudguard (six point fixing) that includes our own FlatRacer-Lucas L679 alloy tail light, all pre-trimmed, pre-drilled and prepared to fit straight on the BMW R2v Series /7, R45/65 and Monolever frames. It includes all the necessary fittings and stainless steel fasteners.

FlatRacer Mancha Branca RH rear

499.99

Recommended products

Below is a list of optional/add on items that we compiled to be used with this item. If you have any specific requirements regarding parts, fit or trim, please do contact us, we will be more than pleased to assist you.

FlatRacer BMW R2v fork brace kit with 5" stainless steel short mudguard

Designed to fit BMW R2v /6 and /7 Series bikes fitted with the early ATE callipers (73-80) or the later Brembo front brakes set up (81-84). Please specify your bike's model and year plus type of front brakes when ordering.

Very sturdy and proven design, will enhance the roadholding qualities of your BMW. This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs. Made of thick steel and powder coated for a long life.

Complete with our own short 5" rounded C shape stainless steel front mudguard, pre-trimmed and pre-drilled, includes all the necessary stainless steel fastners and rubber washers. Alternative 4.5" fork brace kit and matching rear mudguards and tail lights also available, please click More Info for more mudguard options (including alloy and GRP).

£179.99

FlatRacer BMW R2v /7 Series rear sets

Our newly designed rear set kit, integrating the famed Tarozzi foot pegs and pedals. It features the FlatRacer designed linkages plus all the necessary stainless steel fasteners, nylon spacers and rose joints.

Featuring the M10 fixed pegs with bare alloy knurl finish. We can also supply this kit with the fixed pegs with rubber inserts (matt black pedals) at no extra cost. Folding pegs are also available at extra cost but please note their M12 mounting bolts will require some frame modifications (drilling).

Outstanding period look, quality and durabilty, designed to fit all BMW R2v /7 made from 1976 to 1984. Please specify your bike's model and year as there are subtle differences.

Rear set kits for the later series are also available, please contact us for more details.

£269.99

Tarozzi race clip ons

Race clip ons from world famous Italian maker Tarozzi.

Outstanding quality and presentation. Standard BMW R series forks fitment available, other sizes available upon request. Please note that your turning circle may be restricted and will need to be adjusted accordingly by the fitting of clip ons.

Essential if using a cafe racer fairing such as our FlatRacer fairings, Sprint and Ducati replica. Low rise and High rise clip ons are also available.

Please click in More Info for further details on handlebar options.

£129.99

BMW R2v /7 Series stainless steel kit

Add a bit of bling to your ride! This kit comprises of virtually all of the external fasteners on the bike including the engine studs (often rusty and damaged). All fasteners are individually hand turned on a lathe to a high standard of finish.

No more rusty bolts, easy to clean and maintain. It is most important to coat all threads with copper grease or molybdenum disulphide grease and not overtighten it. Contain 185 to 245+ items, depending on the model.

Please indicate your bike's model, year, frame and engine number when ordering.

£259.99

BMW R2v /5 Series stainless steel side panels

Originally introduced by BMW as an option for the later BMW R2v /5 Series and standard equipment for some USA models, these were not overly popular, not least in Europe where the BMW riders' taste was somewhat more restrained. Fits all the /5, /6 and /7 Series bikes.

These side panels are high quality stainless steel stampings, accurate replicas of the original albeit without the black painted stripes. Fits exactly as per the originals (a rubber band and the four tangs on the rear sub-frame, often missing). Very cool and period looking!

High quality GRP /7 replicas available, please click More info.

119.99

FlatRacer BMW R2v deluxe Monza cap

At last, a kit that enables you to fit an alloy Monza cap to your original BMW tank (24lt), replacing the functional but not that attractive flush black BMW cap.

It includes a manually and individually machined alloy adaptor collar, a high quality alloy Monza cap (2 1/2"), fitted with a proper vent and seal plus an original BMW top dust seal and lower grooved o-ring seal. Straight swap. Looks outstanding!

Fits all BMW R2v Series fuel tanks made after 1976, fitted with the black, screw in, flush mounted petrol cap.

Other accessories available including budget chrome Monza cap. Click More info.

£119.99