Mobile visitors

____________

Our website uses Adobe Flash which may limit browsing on Android and other Mobile devices.

For full browsing and shopping capabilities, please install Adobe Flash Player

Contact us!

FlatRacer BMW Munchen tail kit

FlatRacer BMW Munchen tail kit

Our largest tail kit for the BMW R2v Series and also the most comfortable. it fits all the R2v Series apart from the /6, GS/ST derived models and the later Paralevers models. It includes:

  • FlatRacer Munchen GRP tail section, pre-trimmed and drilled
  • Pre-fitted stainless steel front hinge incl s/s fasteners
  • Pre-fitted BMW OEM locking spigot
  • Pre-fitted 4 front rubber bump stops incl. s/s fasteners
  • Upholstered seat base, pre-fitted w/ rivnuts & stainless fasteners
  • BMW 45mm alloy roundel emblem
    • The kit comprises our tail section, made of GRP for corrosion resistance and long working life, finished in gloss white gel coat. As per our usual standard, it is extra strong, typically 4-6mm+ thick in the seat area, thanks to be reinforced with 300/600gr/m2 woven roving (similar to yatch construction methods), flexible yet nigh on unbreakable.

      As per our standard practice with our tail kits, it comes with a pre-fitted upholstered seat base, fixed by 8 stainless steel bots and large penny washers onto the base pre-fitted rivnuts. This makes it easier to remove it for paint or repair.

      The foam has the correct density for comfort and ergonomics and the heavy duty black vinyl seat cover features our trademark pleated design, hot pressed in place to keep it water resistant.

      Although we can make this seat fits all the BMW road going models, the Munchen tail kit is especially suitable for the /5 SWB and the later /7 , R45/65 and Monolever series models. It can fit the /6 Series if an earlier /5 SWB rear sub-frame is used or a later /7 tank is adopted. Please do contact us for more details.

      Optional pre-fitted seat alloy trim available at additional cost. Please check below for more details.

299.99

Optional / Recommended products

Below is a list of optional/add on items that we compiled to be used with this item. If you have any specific requirements regarding parts, fit or trim, please do contact us, we will be more than pleased to assist you.

FlatRacer optional pre-fitted seat base polished alloy trim

Our optional pre-fitted trademark polished alloy trim to the upholstered seat base. Fastened in place using stainless steel fasteners. We also include our labour trimming the tail section itself to accomodate this feature.

Proper alloy trim, as seen in the 50s-70s seats, not cheap chrome effect plastic, often periculous clipped in place.

A very neat and classy feature, seldom seen in this type of Cafe Racer tail seats.

£34.99

FlatRacer BMW R2v L564 5" stainless steel medium rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless steel rear mudguard.

This mudguard kit comprises a 5" (or 6", state your choice) wide stainless steel rear mudguard, pre-trimmed and pre-dilled. The overhang at the rear is circa 150mm (total lenght along its curvature is circa 900mm). Comes complete with a pre-fitted Lucas L564 tail light and all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

This mudguard will fit most BMW Airheads made between 1970 to 1993, including the /5 (SWB & LWB), /6, /7, R45/65 and Monolever road models. Other mudguard options including matching front are available. Click More info for futher details.

229.99

FlatRacer BMW R2v stainless steel short rear mudguard

Short polished stainless steel rear mudguard, 5" or 6" wide, pre-trimmed and pre-drilled to fit all BMW R2v Series bikes (please specify your model and year and desired width).

Total lenght along its curvature is circa 360mm. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap. Discreet and efficient, especially suited for Cafe Racer projects. Alloy versions and medium and long rear mudguards are is also available, please click More Info for details.

No other components included in this sale, photo of the mudguard installed for illustration purposes only.

£59.99

FlatRacer/Tarozzi BMW R2v /7 Series 78-84 rear sets

Our newly designed rear set kit, integrating the famed Tarozzi foot pegs and pedals. It features our own developed stainless steel and bronze linkages plus all the necessary stainless steel fasteners, nylon spacers and rose joints.

Featuring the M10 fixed pegs with bare alloy knurl finish. We can also supply this kit with the fixed pegs with rubber inserts (matt black pedals) at no extra cost. Folding pegs are also available at extra cost but please note their M12 mounting bolts will require some frame modifications (drilling).

Outstanding period look, quality and durabilty, designed to fit all BMW R2v /7 made from 1976 to 1984. Please specify your bike's model and year as there are subtle differences.

Similar rear set kits for the other Series also available. Please click More info.

£269.99

Tarozzi race clip ons

Race clip ons from world famous Italian maker Tarozzi.

Outstanding quality and presentation. Standard BMW R series forks fitment available (please specify your bike model and year when ordering) , other sizes available upon request. Please note that your turning circle may be restricted and will need to be adjusted accordingly by the fitting of clip ons.

Essential if using a cafe racer fairing such as our FlatRacer, Sprint and Ducati replica. Low rise and High rise clip ons are also available.

Please click in More Info for further details on handlebar options.

£129.99

FlatRacer BMW R2v deluxe Monza cap

At last, a kit that enables you to fit an alloy Monza cap to your original BMW tank (24lt), replacing the functional but not that attractive flush black BMW cap.

It includes a manually and individually machined alloy adaptor collar, a high quality polished alloy Monza cap (2 1/2"), fitted with a proper vent and seal plus an original BMW top dust seal and grooved lower o-ring. Straight swap. Looks outstanding!

Fits all BMW R2v Series fuel tanks made after 1976, fitted with the black, screw in, flush mounted petrol cap.

Other accessories also available including budget chrome Monza cap. Click More info.

£119.99