Cafe Racers

Mobile visitors


Our website uses Adobe Flash which may limit browsing on Android and other Mobile devices.

For full browsing and shopping capabilities, please install Adobe Flash Player

Contact us!

FlatRacer BMW FlowLiner full kit

FlatRacer BMW FlowLiner full kit

For those looking for the ultimate conversion kit, as fitted to our FlatRacer Mancha Branca project.

Our FlatRacer BMW FlowLiner full cafe racer fairing kit was developed by us as a challenge as we are great admirers of the original Cafe Racer look and British short circuit racers from the 60s. After nearly 5 years of slow development, it is here. This full fairing offers superior aerodynanic advantages contributing for higher speeds, lower fuel consumption and enhanced rider's comfort at speed.

As per our usual practice, we've composed a full BMW Cafe Racer kit that includes all the major components to transform your BMW R2v Airhead into a stunning Cafe Racer with minimal hassle.

Our FlatRacer BMW FlowLiner full kit comprises: 

  • FlatRacer fork brace kit fitted w/ s/s 5" front short mudguard
  • FlatRacer FlowLiner full fairing kit incl screens and fit hardware
  • FlatRacer deluxe alloy Monza fuel tank cap kit
  • FlatRacer Daytona tail kit incl 5.50" s/s mudguard and L679 light
  • Tarozzi race clip ons
  • FlatRacer/Tarozzi rear sets
  • MegaTon short exhaust silencers
    • This kit includes all the labour for trimming, drilling and pre-fitting all the parts, requiring only minimal preparation work to fit on your bike although further modifications may be required to fit certain models. It also includes all the necessary fitting hardware and stainless steel fasteners, rubber washers, bobbins etc.

      All our parts are trial fitted in a similar frame to your bike model and year to ensure correct fit. We can add, swap or alter the list of parts that compose this kit. If you have a specific request, please do contact us.

FlatRacer Mancha Branca RH rear


NB: This kit is made to order, please contact us for the delivery schedule. Our full fairing requires the use of low bars such clip ons. Further fairing trimming may be required on post 1981 bikes or bikes fitted with bar mounted front brake master cylinder. It may also restrict the turning circle and suspension travel. Use of rear sets is also recommended. Please contact us for more info and advice.

Optional / Recommended products

Below is a list of optional/add on items that we compiled to be used with this listing. If you have any specific requirements regarding parts, fit or trim, please do contact us, we will be more than pleased to assist you.

FlatRacer BMW R2v Airhead 70-84 add on handling kit

Flatracer BMW R2v Airhead handling kit designed to fit thw twin shock models (70-84). This kit will transform and improve amazingly the handling of your bike, especially when used in conjunction with the FlatRacer fork brace kit (included in the Full Cafe Racer kit) No modifications are necessary, simply bolt on or direct replacement. It comprises:

Ready to be fitted on your bike, it comprises:  

  • Progressive front suspension springs
  • BMW fork seals (essential)
  • FlatRacer fork pre-load adjusters
  • Hagon 2810 adjustable rear shock absorbers
    • Similar kits available for post 85 BMW Monolevers at extra cost. Please contact us.


Dash mounted electronic 73mm speedometer / tachometer

Dash mounted dash pod that is ideal for fairings that feature a flat dash panel, requiring a hole of 64mm and a clearance of 41mm for its total lenght. It can also be mounted on the top yoke or any other surface by the using the bracket supplied with it. If fitting on our FlowLiner full fairing, drilling a large hole on the headlight shell may be required to clear this unit.

This electronic speedo/tacho offers excellent value for money as It features nearly the same functions as the 70mm Billet Alloy speedo/tachos. Lightweight yet sturdy construction thanks to its ABS plastic body finished in gloss black, featuring an outer 73mm chrome effect bezel.

Complete with a specific BMW R2v speedo sensor. For more technical details, please click More info.


FlatRacer BMW clock and voltmeter set

BMW replica voltmeter and clock, made by the BMW supplier so OEM quality, as fitted on the R90S, R100S, R100RS and RT models, an useful addition to monitor your bike's charging system and keep an eye on time. White numerals and quartz clock movements plus satin black bezels, as per the originals.

If fitting these on our FlowLiner full fairing, shortening the long mounting stud for the clamp rear brackets may be required to clear our fairing spider web bracket.

Other fittings including wiring looms are available separately. Please contact us for further details.


BMW R2v engine alloy top cover

BMW R2v Airhead engine alloy top cover. Sand cast alloy cover that replaces the orignal starter motor cover and air filter box. Close match to the engine alloy finish and precison machined for accurate fit. Ideal if running carburettor bellmouths / trumpets or conical air filters. Excellent quality and finish, made in small batches for us in Germany.

Sporty, sleek and elegant.

Please be aware that you will need to re-route the engine breather hose(s) and relocate the choke lever on pre 81 motorcycles.

Other accessories available. Please click More info.


BMW R2v Airhead round rocker cover set

BMW R2v Airhead round rocker covers (kidney shape), standard fitting on all BMW /5 and /6 models. A very popular modification on the post 1976 bikes (BMW /7, R45/65 and Monolever) which had the later black angular shaped covers. Made in Germany, very high quality alloy casting. Straight fit, no modifications necessary. Fits all BMW R2v Airhead engines (1969-1996, type 247 and typ 248).

Complete with new side studs and nuts plus the necessary rocker cover gaskets. Sold as a pair.

Other accesories available, please click More info.


K&N BMW R2v pre 1980 replacement air filter

K&N needs no introduction, the best replacement air filter for your bike, washable and re-usable, it uses premium quality oiled cotton gauze sandwiched between layers of wire screen.

Except under very dusty conditions K & N filters will only need washing and re-oiling every 10,000 to 15,000 miles. Excellent filtration with improved air flow.

Direct replacement of your original cylindrical paper air filter(fitted on Airheads between 1969-1980), easily fitted in minutes. Replacement K&N air filters also available for post Sept 1980 bikes (flat filter) at extra cost. Please click More info for other air filtration options.


FlatRacer Blink & Wink kit

Essential for day to day running. Our FlatRacer Blink & Wink kit comprises of:

  • 2 x Pairs of Universal adjustable alloy indicators (brushed or chrome finish)
  • 2 x Stainless steel round bar end mirror
    • These are some of our most popular items, now set as a package deal and keener price.

      If you prefer toher type of indicators and/or mirror, please do contact us, we will tailor make a kit for you.


FlatRacer BMW /6 & /7 GRP side panels

FlatRacer BMW R2v /6 & /7 pair of pattern GRP side panels, built to you usual high standards and in fact stronger and sturdier than the original mould injected GRP/plaster ones.

Straight replacement, fits exactly as per the original items, using a rubber band (not supplied) through the attached inner metal loops.

As these side panels are easily damaged and lost as their fixing tabs are usually damaged or missing from the frame, we strongly advise you to drill two small holes and fit a pair of plastic ties on each panel in order to secure them safely.