Cafe Racers

Mobile visitors

____________

Our website uses Adobe Flash which may limit browsing on Android and other Mobile devices.

For full browsing and shopping capabilities, please install Adobe Flash Player

Contact us!

FlatRacer BMW Monza 8" fairing kit

FlatRacer BMW Monza 8" fairing kit

This fairing was developed by us using the Ducati Bevel design from the Seventies as a base but featuring a "frenched in" headlight opening as per the R90S cockpit fairing. This in an ideal solution for the original BMW/Bosch 215mm or other 8" headlights.

It comprises:

  • FlatRacer 8" Monza fairing
  • FlatRacer fairing screen incl. fasteners
  • FlatRacer fairing fitting hardware for BMW /7 & Monolevers
    • It will fit straight onto the /7 Series and Monolevers, other models may require minor modifications, please do contact us for more details.

      The FlatRacer BMW Airhead Monza 8" fairing is made of GRP (fibreglass), very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Built to a high standard in gloss white gel coat on the exterior and with a fairly smooth surface inside (we use GRP surface mat for a better finish). Finished with our usual attention to detail so smooth ans straight edges and no air bubbles, cracks, frayed edges etc.

      It includes all the necessary fitting brackets including a spider web bracket designed by us to fit the BMW R2v frames.

      This assembly kit also includes all the necessary stainless steel fasteners, special nylon cup washers and rubber washers to reduce abrasion between the fairing and the screen.

      We can also supply and pre-fit our own design optional acrylic headlight cover (shown), laser cut, pre-drilled and mated to the fairing as add on option. This solution provides a degree of protection from road debris and stone chips that can crack the expensive headlight glass. It is an elegant and neat solution. See below for more details

£349.99

NB: This fairing is made to order, please contact us for the delivery schedule. It also requires the use of low bars such clip ons. It may also restrict the turning circle and suspension travel. Use of rear sets is also recommended. Please contact us for more info and advice.

Optional / Recommended products

Below is a list of optional/add on items that we compiled to be used with this item. If you have any specific requirements regarding parts, fit or trim, please do contact us, we will be more than pleased to assist you.

FlatRacer optional pre-fitted 8" headlight acrylic cover

Our optional pre-fitted trademark laser cut 3mm thick headlight acrylic headlight cover.

Fastened in place using zinc plated small angle plates, stainless steel fasteners and rubber washers.

We also include our labour for trimming and drilling the fairing itself to accomodate this feature.

A very neat and elegant feature, seldom seen in this type of Cafe Racer fairings.

£34.99

FlatRacer Monza fairing screen (undrilled)

Screen for the FlatRacer or Monza top fairing, made of clear acrylic, high quality and cut with precision to ensure fitting accuracy.

Please note that these are supplied un-drilled and may require further trimming/cutting to fit your particular fairing. Please contact us for advice and further info.

Grey tint colour available upon request and at additional cost (£10).

Currently unavailable

Tarozzi race clip ons

Race clip ons from world famous Italian maker Tarozzi.

Outstanding quality and presentation, please do not confuse these with other inferior and some outright dangerous offerings. Standard BMW R series forks fitment available (please specify your bike model and year when ordering) , other sizes available upon request. Please note that your turning circle may be restricted and will need to be adjusted accordingly by the fitting of clip ons.

Essential if using a cafe racer top fairing such as our FlatRacer Monza, FlowLiner, Sprint and Ducati replicas. Low rise and High rise clip ons are also available.

Please click in More Info for further details on handlebar options.

£129.99

FlatRacer/Tarozzi BMW R2v /7 Series 78-84 rear sets

Our newly designed rear set kit, integrating the famed Tarozzi foot pegs and pedals. It features our own developed stainless steel and bronze linkages plus all the necessary stainless steel fasteners, nylon spacers and rose joints.

Featuring the M10 fixed pegs with bare alloy knurl finish. We can also supply this kit with the fixed pegs with rubber inserts (matt black pedals) at no extra cost. Folding pegs are also available at extra cost but please note their M12 mounting bolts will require some frame modifications (drilling). Please click More info for further details.

Outstanding period look, quality and durabilty, designed to fit all BMW R2v /7 made from 1976 to 1984. Please specify your bike's model and year as there are subtle differences.

£269.99

FlatRacer BMW R2v /6 & /7 Series fork pre-load adjusters

Our new fork pre-load adjusters, made of 304 grade stainless steel and phosphorous bronze, an overkill of engineering.

Outstanding looks and quality. It allows fine adjustment of fork pre-load by pre-loading the internal fork springs. This allows to control ride height, control dive and allow for a more firm and stable ride. It is particularly suited to our low positioned top fairings (for the correct stance), removing the risk of the fairing touching the front mudguard under heavy braking.

Recommended fit with progressive front springs allied to our tubular steel fork brace. Designed to fit all BMW R2v /6 and /7 Series 36mm forks (1973-1984).

£124.99

FlatRacer BMW R2v progressive springs

Forks springs tend to get work fatigue and become inneficient in as little as 3 years of normal riding. This tends to aggravate an already softly sprung front end with its long suspension front travel. BMW in fact recommended their replacement in certain models every five years.

The Flatracer pair of progressive fork springs are designed for improved handling and ridability. The progressive winding means that as the suspension becomes compressed the springs become stronger, absorbing small bumps but stiffenning progressively.

The result never fails to impress for how much stabler and compliant the front end will feel, especially if used with one our fork braces and fork pre-load adjusters. New oil and seals are also recommended. We can supply these for all R2v bikes, please specify your model & year. Please contact us for more details.

£59.99