Latest projects

Contact us!

BMW Stainless Steel

BMW stainless steel fastener set

This kit comprises the vast majority of all of the external fasteners on the BMW R2v bike. The majority are individually hand turned on a lathe to a high standard of finish.

Each kit contains 190 to 250 items, depending on the model and do include drain & filler plugs plus the the engine studs, often rusted in place. It also includes our s/s top steering centre nut with 16mm BMW enamel badge and s/s swing arm pivot cover with fittings.

This kit means no more rusty bolts, the stainless fasteners are easy to clean and maintain. However, it is most important to coat all threads with copper grease or molybdenum disulphide grease and not overtighten it. Please indicate your bike's model, year, frame and engine number when ordering.

Part of our Full Stainless Steel kit (package deal), please click More info for further details.

£259.99

BMW stainless steel wheel spindles set

Set of stainless steel front and rear spindes for you Airhead.

It includes all the necessary spindles, spacers, washers and nuts. The spindles, washers and spacers (not shown) are individually finished in a lathe for an outstanding bright and smooth finish.

Replace your old, rusty and scaby spindles for this amazing kit. Fits all BMW R2v /5, /6 & /7 Series (70-84). Please specify your bike model and year when ordering

Part of our Full Stainless Steel kit (package deal), please click More info for further details.

£139.99

BMW /6 & /7 stainless steel standard battery tray kit

BMW R2v Series /6 and /7 Stainless steel battery tray, a close replica to the original 25/30 amperes battery tray (fitted from BMW /6 Series on). It will accept the original size battery. Available in either black powder coated finish or bare stainless steel.

It includes a stainless top retainer plate, stainless steel knurled retaining nuts, 5 short silent blocks and all the necessary stainless fasteners.

We can include an original BMW silent block with the longer stud for the rear brake master cylinder on rear disc equipped bikes at extra cost. Please contact us with your request.

Identical s/s cages are also available for Monolever models and /6 & /7 Series fitted with the smaller gel Odyssey PC680 battery. See the listing below for more details.

£129.99

BMW /6 & /7 stainless steel compact battery tray kit

BMW R2v Series /6 and /7 Stainless small steel battery tray, designed to accept the more modern and powerful gel/AGM/Lithium batteries such as the Odyssey PC680 or PC545.

It includes a stainless top retainer plate, knurled retaining nuts, 5 short silent blocks and all the necessary stainless fasteners.

We can include an original BMW silent block with the longer stud for the rear brake master cylinder on rear disc equipped bikes at extra cost. Please contact us with your request.

Identical s/s cages are also available for Monolever models. See the listing below for more details.

£119.99

BMW Monolever stainless steel battery tray kit

BMW R2v Monolever (post 1985) Stainless steel battery tray, a close replica to the original battery tray. It will accept the original size battery or the more modern and powerful alternatives such as the Odyssey PC680 AGM battery or other similar sized Gel/Lithium types. Black powder coat finish as per the original. Bare finish available upon request and depending on availability. Please contact us for more details.

It includes the original pair of BMW rubber straps, 4 short silent blocks and all the necessary stainless steel fasteners.

Identical s/s cages are also available for Monolever models and /6 & /7 Series fitted with the smaller gel Odyssey PC680 battery. See the listings above for more details.

Part of our Full Stainless Steel kit (package deal), please click More info for further details.

£119.99

FlatRacer BMW stainless steel fork pre-load adjusters

Our new fork pre-load adjusters, made of 304 grade stainless steel and phosphorous bronze, an overkill of engineering.

Outstanding looks and quality. It allows fine adjustment of fork pre-load by pre-loading the internal fork springs. This allows to control ride height, control dive and allow for a more firm and stable ride.

Recommended fit with progressive front springs allied to our tubular steel fork brace.

Designed to fit all BMW R2v /6 and /7 Series 36mm forks (1973-1984).

Part of our handling kit, please click More info for further details.

£124.99

FlatRacer BMW stainless steel top yoke plate

FlatRacer BMW R2v polished stainless steel top yoke plate.

Direct replacement of the original 4mm steel top yoke plate which is often damaged or rusty. Rust proof, good looking, offering minimum maintenance.

Available for all the BMW /7 Series (1976-1984) and Monolever models (1985 on). Please state your model when ordering

Similar top yoke plates for the /6 and R90S will be shortly available (will also fit /5).

Can be supplied as a package deal with our fork pre-load adjusters (/6 and /7 only) and s/s top steering nut, please contact us for pricing.

£49.99

FlatRacer BMW stainless steel steering stem top nut w/ enamel badge

BMW R2v stainless steel steering stem/top yoke centree nut, it includes a seprate brass enamel BMW badge, a very neat option for those bikes that do not have a steering damper.

Please note that the brass badge will need to glued/stuck with double sided tape (not included) in place once the centre nut is torqued in place correctly.

Direct replacement of the original which often is damaged, rounded off and rusty.

Rust proof, good looking and minimum maintenance. Fits all R2v (70-96)

Part of our Full Stainless Steel kit (package deal), please click More info for further details.

£34.99

FlatRacer BMW stainless steel swing arm covers

BMW R2v Airhead stainless steel swing arm pivot covers. Direct replacement for the original plastic items, often missing or damaged / scratched / distorted.

Fits all BMW R2v Series made between 1970-1995

Includes all the necessary fittings. Sold as pair.

Part of our Full Stainless Steel kit (package deal), please click More info for further details.

£19.99

BMW R2v stainless steel drum brake linkage rod

Designed for rear brake drum bikes, it includes a stainless steel adjusting rod, knurled adjuster nut, rod trunion and clevis pin. Individually hand turned in a lathe for a high standard of finish.

Fits all BMW R2v Airheads fitted with a rear brake drum but please state your bike's model and year as there are differences in the lenght of the brake rod.

Part of our Full Stainless Steel kit (package deal), please click More info for further details.

£49.99

BMW R2v pre 1980 stainless steel drain and filler plugs set

A full set of drain and filler plugs to replace your existing one. Fits exactly as the originals and this set is supplied with crush washers.

This set consists of Engine drain , Gearbox filler & drain , Bevel box filler & drain , Driveshaft filler & drain plug.

Individually hand turned in a lather for a high standard of finish. Fits all BMW R2v Airheads made between 1970-1980. Please note all the drain plugs in this kit are non-magnetic (stainless is non-magnetic).

£54.99

BMW R2v post 1981 stainless steel drain and filler plugs set

A full set of drain and filler plugs to replace your existing one. Fits exactly as the originals and this set is supplied with crush washers.

This set consists of Engine drain ,Gearbox filler & drain , Bevel box filler & drain , Driveshaft inspection & drain plug. Individually hand turned in a lather for a high standard of finish.

Fits all BMW Rv Airheads made between 1981-1996. Please note all the drain plugs in this kit are non-magnetic (stainless is non-magnetic).

£54.99

BMW R2v /5 Series stainless side panels

Originally introduced by BMW as an option for the later BMW R2v /5 Series and standard equipment for some USA models.

These side panels are high quality stainless steel stampings, accurate replicas of the original albeit without the black painted stripes.

It fits exactly as per the originals (a rubber band and the four tangs on the rear sub-frame). Fits all /5, /6 and /7 Series (69-84). Very cool and period looking!

£119.99

BMW R2v pre 1980 air filter box mounting stud assembly

Stainless steel BMW R2v /5, /6 and /7 Series air box mounting stud. it includes a long stud, a spacer and M6 socket head stainless steel bolt.

It makes for much easier job bolting the two halves of the early type air boxes together. No more fumbling with the original long stud, which is often has damaged threads, its head chewed, rusty and unsightly.

£14.99

BMW R2v post 1981 air filter box stainless steel clips

Stainless steel set of air filter box retainer clips (4). Fits all BMW R2v air boxes post 1981 (flat air filter, top cover in black plastic with two forward facing snorkel air intakes).

Straight replacement, a very easy way to swap the often damaged and rusty clips.

£24.99

BMW R2v stainless steel push rod tubes set

Set of BMW R2v stainless steel pushrod tubes (4) to fit any Airhead (please indicate your bike's model and year).

This set will replace the existing tubes which very often are quite corroded and look unsightly as they sit under the cylinders and get most of the road muck and debris, accelerating their corrosion.

Fits exactly as per the originals.

£54.99

BMW R2v stainless steel rocker cover nuts (pair)

BMW R2v series rocker cover centre nuts, stainless steel made, straight replacement.

Sold her as a pair.

Classic round rocker covers, gaskets and other accessories are also available, please click More info for further details.

£9.99