Latest projects

FlatRacer BMW mudguards

FlatRacer BMW mudguards combos

FlatRacer BMW /6 & /7 (74-80) stainless steel mudguard combo

FlatRacer stainless steel mudguard combination, designed to fit all BMW R90S, /6 and early /7 Boxer models made between 1974 and September 1980.

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless mudguards.
.
This kit comprises a 5.5" round polished stainless steel mudguard and our fork brace pre-fitted with a a matching front 5" s/s mudguard. The rear mudguard has six point fixing as per the original. The overhang at the rear is circa 350mm but can be decreased by special request. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers for a straight swap.

Please specify your model when ordering as these are individually trimmed and prepared to fit your specific bike.

£349.99

FlatRacer BMW late /7 (81-84) stainless steel mudguard combo

FlatRacer stainless steel mudguard combination, designed to fit the late BMW /7 Series Boxer models made between September 1980 and 1984 (twin rear shocks).

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless mudguards.
.
This kit comprises a 5.5" round polished stainless steel mudguard and our fork brace pre-fitted with a a matching front 5" s/s mudguard. The rear mudguard has six point fixing as per the original. The overhang at the rear is circa 350mm but can be decreased by special request. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers for a straight swap.

Please specify your model when ordering as these are individually trimmed and prepared to fit your specific bike.

£349.99

FlatRacer BMW R45/65 Series (78-84) stainless steel mudguard combo

FlatRacer stainless steel mudguard combination, designed to fit the BMW R45/65 Series Boxer models made between 1978 and 1984 (twin rear shocks).

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless mudguards.
.
This kit comprises a 5.5" round polished stainless steel mudguard and our fork brace pre-fitted with a a matching front 5" s/s mudguard. The rear mudguard has six point fixing as per the original. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers for a straight swap.

£349.99

FlatRacer BMW R2v Boxer ABS plastic/GRP mudguard combo

FlatRacer BMW R2v Airhead Boxer ABS plastic/GRP mudguard combo designed to fit all R90S, /6, /7 and R45/65 Series (twin shocks) made between 1973 and 1984.

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, lighter and long lasting and just as efficient plastic/GRP mudguards.
.
This kit comprises of a rear white ABS plastic mudguard, pre-trimmed, pre-drilled and prepared to fit your frame with six point fixing as per the original mudguard with a short rear overhanf of circa 5cm. This combo also includes our popular fork brace kit pe-fitted with the FR short front GRP (fibreglass) mudguard. The combo includes all the necessary stainless steel fasteners, rubber bobbins and rubber washers for a straight swap.

Please specify your model when ordering as these are individually trimmed and prepared to fit each specific motorcycle.

£229.99

BMW rear mudguards

FlatRacer BMW 5.5" stainless steel rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for our tail kits, the FlatRacer and Giuliari replica seats.

This stainless steel mudguard is 5.5" wide with a round-ish profile. The overhang at the rear is circa 150mm. Six point fixing as per the original. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

£179.99

FlatRacer BMW 6" long ABS plastic rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, lightweight, long lasting ABS plastic rear mudguard. Particularly suited for our FlatRacer BMW short sub-frame kits, FR tail kits & Giuliari replica seats.

This ABS plastic mudguard is 6" wide with a total lenght (circuference) of cm. Six point fixing as per the original. The overhang at the rear is circa 5 cm on the original BMW sub-frame or 25cm on our FR short sub-frame (can be shortened if required). Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. A shorter version is also available, please see listing below. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

£99.99

FlatRacer BMW medium ABS plastic rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, lightweight, long lasting ABS plastic rear mudguard. Particularly suited for our FlatRacer BMW short sub-frame kits and FR tail kits.

This ABS plastic mudguard is 6" wide with a total lenght (circuference) of cm. Four (on the original BMW sub-frame) or six point (on our FR short sub-frame) point fixing as per the original. The overhang at the rear on our FR short sub-frame is circa 5cm. It includes all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. Not compatible with rear storage trays. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

£89.99

FlatRacer BMW stainless steel short rear mudguard

Short polished stainless steel rear mudguard 6" wide, pre--trimmed and pre-drilled to fit all BMW R2v Series bikes (please specify your model and year and desired width). A more rounded and narrower 5" version is also available by request and subject to availability.

Total lenght along its curvature is circa 360mm. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

Discreet and efficient, it will keep the most of road debris and dirt away from the swing arm/battery area. Especially suited for our FlatRacer tail kits and short sub-frames. An alloy version is also available at no extra cost, depending on availability.

£49.99

Recommended items

FlatRacer L564 pre-fitted tail light

Lucas L564 tail light complete assembly. Pre-fitted to any of our stainless steel rear mudguards. Includes labour and all the required stainless steel fasteners, rubber washers ans wiring grommets.

Accurate replica of the iconic Lucas type 564 rear light, fitted to many British classic bikes and a infinity of home brewed Specials and Cafe Racers.

Complete with an alloy mounting bracket, with chrome plated finish. Replica lenses also available by request.

£44.99

FlatRacer L679 pre-fitted tail light

FlatRacer L679 alloy tail light assembly. Pre-fitted to any of our stainless steel rear mudguards. Includes labour and all the required stainless steel fasteners, rubber washers ans wiring grommets.

Excellent quality tail light assembly, complete with the famous Lucas 679 light, unusually available as a complete integrated unit, assembled by us with our usual attention to detail.

It comprises the tail light, a polished alloy housing and a black powder coated steel mounting bracket, complete with stainless steel fasteners.

£94.99

Bates LED pre-fitted tail light

Bates LED tail light assembly. Pre-fitted to any of our stainless steel or plastic rear mudguards. Includes labour and all the required stainless steel fasteners, rubber washers ans wiring grommets. Chrome version available by special request.

Bates shaped LED Motorcycle Rear Stop & Tail Light. Steel bodied mini rear light, E-marked. Black body with dark smoke lens, 59mm diameter.

Integral red LED stop/tail light

Fully adjustable mounting plate with 5mm bolt fittings. Other tail lights available, please click More Info for details.

£44.99

Classic Alloy indicators (pair) - brushed finish

Cast alloy indicators with an adjustable stem (M8). Sold as a pair. Also available in satin black and chrome finishes, please click More Info for other offerings.

Aproximate measures:

  • Lens size is L 60 x W 30mm
  • Complete indicator length is 120mm
  • Threaded stem length: 25mm (1")
    • Universal fit. Brushed alloy finish with amber lenses. Supplied with 12v 23w bulbs fitted

      Hollow stem for discreet wiring so care should be excercised as overtighten it will cause the stem to break.

£19.99