Latest projects

FlatRacer BMW rear mudguards

Long rear mudguards

FlatRacer BMW long stainless steel rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for the original BMW dual seats with grab rails.

This kit comprises a 5" or 6" wide polished stainless steel mudguard (please specify your choice). Six point fixing as per the original. The overhang at the rear is circa 350mm but can be decreased or increased up to 500mm by special request. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, straight swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

£109.99

FlatRacer BMW long L564 stainless steel rear mudguard

A similar kit to the one above but including a pre-fitted L564 tail light.

This kit comprises a 5" or 6" wide polished stainless steel mudguard (please specify your choice). Six point fixing as per the original. The overhang at the rear is circa 350mm but can be increased up to 500mm by special request. Comes complete with a pre-fitted L564 tail light/plate holder plus all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

£149.99

FlatRacer BMW L679 stainless steel long rear mudguard

A similar kit to the one above but including a pre-fitted L679 tail light and steel plate holder. Particularly suited for the original BMW cowled dual seats as on S, CS, RS, RT, T models.

This kit comprises 5" or 6" wide polished stainless steel mudguard (please specify your choice). Six point fixing as per the original. The overhang at the rear is circa 350mm but can be increased up to 500mm by special request. Comes complete with a pre-fitted L679 tail light and a pressed steel long plate holder plus all the necessary stainless steel fasteners, rubber bobbins and washers.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

£179.99

Medium rear mudguards

FlatRacer BMW 6" stainless steel medium rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for our tail kits, the FlatRacer and Giuliari replica seats.

This kit comprises a medium size 6" wide polished stainless steel mudguard. The overhang at the rear is circa 150mm. Six point fixing as per the original. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

£94.99

FlatRacer BMW 5.75" medium stainless steel rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for our tail kits, the FlatRacer and Giuliari replica seats.

This kit comprises a medium size 5.75" wide polished stainless steel mudguard. Six point fixing as per the original. The overhang at the rear is circa 200mm. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

FlatRacer BMW 5" medium stainless steel rear mudguard

For those looking to replace the effective but ungainly BMW rear mudguard for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless rear mudguard. Particularly suited for our tail kits, the FlatRacer and Giuliari replica seats.

This kit comprises a medium size 5" wide polished stainless steel mudguard. The overhang at the rear is circa 150mm. Six point fixing as per the original. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

FlatRacer BMW L564 6" stainless steel medium rear mudguard

A similar kit to the 6" s/s mudguard above but including a pre-fitted L564 tail light.

This kit comprises a 6" wide polished stainless steel mudguard. Six point fixing as per the original. The overhang at the rear is circa 150mm. Comes complete with a pre-fitted L564 tail light/plate holder plus all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

£139.99

FlatRacer BMW L564 5.75" stainless steel medium rear mudguard

A similar kit to the 5.75" s/s mudguard above but including a pre-fitted L564 tail light.

This kit comprises a 5.75" wide polished stainless steel mudguard. Six point fixing as per the original. The overhang at the rear is circa 200mm. Comes complete with a pre-fitted L564 tail light/plate holder plus all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

FlatRacer BMW L564 5" stainless steel medium rear mudguard

A similar kit to the 5" s/s mudguard above but including a pre-fitted L564 tail light.

This kit comprises a 5" wide polished stainless steel mudguard. Six point fixing as per the original. The overhang at the rear is circa 150mm. Comes complete with a pre-fitted L564 tail light/plate holder plus all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

FlatRacer BMW L679 5.75" stainless steel medium rear mudguard

A similar kit to the 5.75" s/s mudguard above but including a pre-fitted FlatRacer alloy housing L679 tail light. As fitted to our Mancha Branca project.

This kit comprises a 5.75" wide polished stainless steel mudguard. Six point fixing as per the original. The overhang at the rear is circa 200mm. Comes complete with a pre-fitted FlatRacer alloy L679 tail light plus all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

It will fit all BMW R2v Airheads apart from Paralevers and GS/ST models. An alloy version is available by special request at no extra cost, depending on availability. Not compatible with the rear storage box. Please specify your model when ordering as these are individually trimmed and prepared to your specific bike.

Currently unavailable

FlatRacer BMW 6" stainless steel short rear mudguard

Short polished stainless steel rear mudguard 6" wide, pre--trimmed and pre-drilled to fit all BMW R2v Series bikes (please specify your model and year and desired width).

Total lenght along its curvature is circa 360mm. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

Discreet and efficient, especially suited for Cafe Racer projects. An alloy version is also available at no extra cost, depending on availability. No other components included, photo of it installed for illustration purpose only.

£44.99

FlatRacer BMW 5" stainless steel short rear mudguard

Short polished stainless steel rear mudguard 5" wide, pre--trimmed and pre-drilled to fit all BMW R2v Series bikes (please specify your model and year and desired width).

Total lenght along its curvature is circa 360mm. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers, making this kit a very straight forward swap.

Discreet and efficient, especially suited for Cafe Racer projects. An alloy version is also available at no extra cost, depending on availability. No other components included, photo of it installed for illustration purpose only.

£44.99