Latest projects

Contact us!

FlatRacer BMW mudguards

FlatRacer BMW mudguards combos

FlatRacer BMW /6 & /7 (74-80) stainless steel mudguard combo

FlatRacer stainless steel mudguard combination, designed to fit all BMW R90S, /6 and early /7 Boxer models made between 1974 and September 1980.

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless mudguards.
.
This kit comprises a 5.5" round polished stainless steel mudguard and our fork brace pre-fitted with a a matching front 5" s/s mudguard. The rear mudguard has six point fixing as per the original. The overhang at the rear is circa 350mm but can be decreased by special request. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers for straight swap.

Please specify your model when ordering as these are individually trimmed and prepared to fit your specific bike.

£349.99

FlatRacer BMW late /7 (81-84) stainless steel mudguard combo

FlatRacer stainless steel mudguard combination, designed to fit the late BMW /7 Series Boxer models made between September 1980 and 1984 (twin rear shocks).

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless mudguards.
.
This kit comprises a 5.5" round polished stainless steel mudguard and our fork brace pre-fitted with a a matching front 5" s/s mudguard. The rear mudguard has six point fixing as per the original. The overhang at the rear is circa 350mm but can be decreased by special request. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers for straight swap.

Please specify your model when ordering as these are individually trimmed and prepared to fit your specific bike.

£349.99

FlatRacer BMW R45/65 Series (78-84) stainless steel mudguard combo

FlatRacer stainless steel mudguard combination, designed to fit the BMW R45/65 Series Boxer models made between 1978 and 1984 (twin rear shocks).

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, stronger and longer lasting and just as efficient stainless mudguards.
.
This kit comprises a 5.5" round polished stainless steel mudguard and our fork brace pre-fitted with a a matching front 5" s/s mudguard. The rear mudguard has six point fixing as per the original. Comes complete with all the necessary stainless steel fasteners, rubber bobbins and rubber washers for straight swap.

£349.99

FlatRacer BMW R2v Boxer ABS plastic/GRP mudguard combo

FlatRacer BMW R2v Airhead Boxer ABS plastic/GRP mudguard combo designed to fit all R90S, /6, /7 and R45/65 Series (twin shocks) made between 1973 and 1984.

For those looking to replace the effective but ungainly BMW mudguards for a sleeker and more attractive, lighter and long lasting and just as efficient.
.
This kit comprises of a rear white ABS plastic mudguard, pre-trimmed, pre-drilled and prepared to fit your frame with six point fixing as per the original mudguard with a short rear overhang of circa 5cm. This combo also includes our popular fork brace kit pe-fitted with the FR short front GRP (fibreglass) mudguard. The combo includes all the necessary stainless steel fasteners, rubber bobbins and rubber washers for straight swap.

Please specify your model when ordering as these are individually trimmed and prepared to fit each specific motorcycle.

£229.99

BMW front mudguards & fork brace kits - stainless steel

FlatRacer BMW fork brace kit w/ 4.5" stainless steel front mudguard

FlatRacer fork brace kit pre-fitted with our short and sleek 4.5" stainless steel mudguard, available to fit the BMW R2v /6 & /7 and the R45/65 Series made between 1974 to 1984 (twin shock models). Our tubular steel fork brace is very sturdy and proven design that will enhance the roadholding qualities of your BMW. This tubular brace replaces the original flimsy mudguard mount & provides a substantial increase of torsional rigidity for the forks.

Made of thick steel and powder coated for a long life. Complete with our own short 4.5" rounded slim shape stainless steel front mudguard. It is pre-trimmed and pre-drilled and includes all the necessary stainless steel fasteners and rubber washers.

Very limited availability, please contact us for stock status.

£199.99

FlatRacer BMW /6 & early /7 (74-80) fork brace kit w/ 5" stainless steel front mudguard

FlatRacer BMW /6 and early /7 series fork brace kit, designed to fit BMW R /6 & /7 motorcycle models fitted with front sliding pivot ATE calliper brake systems made between 1973 to September 1980, very sturdy and proven design, it will enhance the roadholding qualities of your BMW.

This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs, increasing torsional rigidity, a notorious telescopic fork weakness.

Made of thick steel and powder coated for a long life. Complete with our own short 5" rounded stainless steel front mudguard, circa 60cm in circunference. It is pre-trimmed and pre-drilled and includes all the necessary stainless steel fasteners and rubber washers.

£179.99

FlatRacer BMW late /7 (81-84) fork brace kit w/ 5" stainless steel front mudguard

FlatRacer BMW R80, R100 /7 series fork brace kit, designed to fit the later BMW /7 motorcycle models fitted with twin opposed piston Brembo P08 calliper brake systems made from September 1980 to 1984 (twin shocks). A very sturdy and proven design, it will enhance the roadholding qualities of your BMW.

This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs, increasing torsional rigidity, a notorious telescopic fork weakness.

Made of thick steel and powder coated for a long life. Complete with our own short 5" rounded stainless steel front mudguard, circa 60cm in circunference. It is pre-trimmed and pre-drilled and includes all the necessary stainless steel fasteners and rubber washers.

£179.99

FlatRacer BMW R45/65 (78-84) fork brace kit w/ 5" stainless steel front mudguard

FlatRacer BMW R45/65 fork brace kit, designed to fit the BMW R45/65 motorcycle models fitted with twin opposed piston ATE (early models) and the later Brembo P08 calliper brake systems made between 1978 and 1984 (twin shocks). A very sturdy and proven design, it will enhance the roadholding qualities of your BMW.

This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs, increasing torsional rigidity, a notorious telescopic fork weakness.

Made of thick steel and powder coated for a long life. Complete with our own short 5" rounded stainless steel front mudguard, circa 50cm in circunference (best suited for the front 18" wheel). It is pre-trimmed and pre-drilled and includes all the necessary stainless steel fasteners and rubber washers.

£179.99

BMW front mudguards & fork brace kits - GRP

FlatRacer BMW /6 & /7 (74-80) fork brace w/ short GRP front mudguard

FlatRacer fork brace kit designed to fit BMW R2v /6 & early /7 fitted with front sliding pivot ATE calliper brake systems fitted on bikes made between 1973 and September 1980. A very sturdy and proven design, will enhance the roadholding qualities of your BMW.

This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs, increasing torsional rigidity, a notorious telescopic fork weakness.

Made of thick steel and powder coated for a long life. Complete with our own short front GRP front mudguard (24cm shoter than the original in circunference). It is pre-trimmed and pre-drilled and includes all the necessary stainless steel fasteners and rubber washers.

£144.99

FlatRacer BMW late /7 (81-84) fork brace w/ short GRP front mudguard

FlatRacer fork brace kit designed to fit the late BMW R80 and R100 /7 models fitted with twin opposed piston Brembo P08 calliper brake systems made from September 1980 to 1984 (twin shocks) . A very sturdy and proven design, will enhance the roadholding qualities of your BMW.

This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs, increasing torsional rigidity, a notorious telescopic fork weakness.

Made of thick steel and powder coated for a long life. Complete with our own short front GRP front mudguard (24cm shoter than the original in circunference). It is pre-trimmed and pre-drilled and includes all the necessary stainless steel fasteners and rubber washers.

£144.99

FlatRacer BMW R45/65 (78-84) fork brace kit w/ short GRP front mudguard

FlatRacer fork brace kit designed to fit the BMW R45/65 motorcycle models fitted with twin opposed piston ATE callipers (early models) and the later Brembo P08 calliper brake systems made between 1978 and 1984 (twin shocks). A very sturdy and proven design, it will enhance the roadholding qualities of your BMW.

This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs, increasing torsional rigidity, a notorious telescopic fork weakness.

Made of thick steel and powder coated for a long life. Complete with our own short 5" rounded stainless steel front mudguard, circa 50cm in circunference (best suited for the front 18" wheel). It is pre-trimmed and pre-drilled and includes all the necessary stainless steel fasteners and rubber washers.

£144.99

BMW front mudguards - GRP

FlatRacer BMW /6 & /7 short GRP front mudguard

Short front mudguard developed exclusively by us based on an original /6 Series wide front mudguard, 24cm shorter than original /6 Series BMW item.

We've kept the bead edge all around as per original. It will fit all the BMW /6 and /7 Series bikes made between 1973 to 1984. Made of high quality fibreglass (GRP), excellent quality, glossy white finish. Pre-drilled for fitting accuracy, it includes the required stainless steel fasteners (including dome nuts) and rubber washers.

Compatible with all BMW original /6 & /7 mudguard holders, our tubular steel fork braces and Tarozzi stabilizers.

Out of stock

FlatRacer BMW long GRP replica front mudguard

Accurate replica of the original BMW /6 & /7 Series front mudguard developed exclusively by us. Sturdier than the original item and very well finished, with our usual attention to detail.

It will fit all the /6 and /7 Series bikes made between 1973 to 1984. Made of high quality fibreglass (GRP), excellent quality, glossy white finish. Pre-drilled for fitting accuracy, it includes the required stainless steel fasteners (including dome nuts) and rubber washers.

Compatible with the original BMW /6 & /7 Series mudguard holders and our tubular steel fork braces plus Tarozzi fork stabilizers.

£59.99

FlatRacer BMW Monolever front mudguard

Short front mudguard developed exclusively by us to suit the BMW Monolever front end.

Sleek and sportier than the original mudguard, it will offer similar protection from the elements. Designed to be bolt on and hassle free straight replacement of the original. It will fit all the BMW R65, R80 and R100 Monolever models made between 1985 and 1996.

Made of high quality fibreglass (GRP), excellent quality, glossy white finish. Pre-drilled for fitting accuracy, it includes all the required stainless steel fasteners.

Compatible with the all important BMW Monolever alloy fork bridge/stabiliser.

Under development