Latest projects

BMW Cafe Racer Fairings

FlatRacer BMW R2v FlowLiner full fairing kit

Inspired by the old Sixties Racing Manx fairings, this full fairing will feature a 7" headlight opening for road use and lower fairng panels based on the original RS/RT items. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen. Its dashboard will allow the fitting of clocks and gauges.

It includes our own design acrylic headlight cover, laser cut, pre-drilled and mated to the specially developed recess for the cover on the fairing, providing and elegant and neat flush fitting., allowing the use on the road with a 7" or 8" headlight. The cover can be replaced by a numbered racing roundel!

It will include all the necessary fitting brackets, similar to the original RS/RT fairing arrangement. It will also include all the necessary stainless steel fasteners, special nylon cup washers and rubber washers. Made to order. Please click More info for further details

£799.99

FlatRacer BMW R2v 8" Monza fairing kit

This fairing was developed by us using the Ducati Bevel design from the Seventies as a base but featuring a "frenched in" headlight opening, ideal for 8" or the BMW/Bosch 215mm headlights. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen. Optional acrylic headlight cover also available at extra cost (shown).

It includes all the necessary fitting brackets including our spider web bracket designed to fit the BMW R2v frames. The kit also includes all the necessary stainless steel fasteners, special nylon cup washers and rubber washers to reduce abrasion between the fairing and the screen. This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc. Please click More info for further details.

£329.99

FlatRacer BMW R2v 7" Monza fairing kit

This fairing was developed by us using the Ducati Bevel design from the Seventies as a base and similar the our 8" fairing above apart from the smaller headlight opening, without the inner lip. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen. Optional acrylic headlight cover also available at extra cost (shown).

It includes all the necessary fitting brackets including our spider web bracket designed to fit the BMW R2v frames. The kit also includes all the necessary stainless steel fasteners, special nylon cup washers and rubber washers to reduce abrasion between the fairing and the screen. This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc. Please click More info for further details.

329.99

FlatRacer Sprint fairing kit

Inspired by the old Sixties racing Manx fairings, we've developed and refined the lines of this Avon old design, presenting now sharper and more symmetrical lines, especilly around the screen. Made of GRP, finished in glossy white. It includes a pre-trimmed, pre-drilled and mated acrylic screen and as the fairing is produced in a split mould, it allow the fitting of clocks and gauges on its full dash. Please check our range of electronic speedo/tacho units designed to fit the BMW. NO fitting hardware is included although we are working on it. Please contact us for fitting advice.

This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc.
Ideal for racing. Please note that there is no headlight aperture. Please also be aware that this fairing requires the use of low handlebars such as clip ons.

£239.99

FlatRacer BMW R2v AeroFlux full fairing kit

BMW R2v Cafe Racer full fairing. Similar in concept to our Flowliner BMW full fairing kit but offering the possbility of more upright rising position thus more comfort for long rides.

Under development, no firm sale date.

Please keep an eye on our Facebook page for upcoming details..

£339.99

Under development.
Coming soon!

FlatRacer BMW R90S cockpit fairing kit

The iconic BMW R90S cockpit fairing, the first fairing to be fitted on a mass produced motorcycle from the manufacturer.

This kit is designed to fit any BMW /6 & /7 R2v Series keeping a low cost (this kit is seriously expensive from BMW, at over £850 and not all parts are available or included!). It will fit as per the original fairing using our complete fitting kit (top and bottom mounts)that bolts to the fairing inner mounting lugs, unlike other inferior replicas on the market.

This new fairing is very sturdy, thick (typically between 4 to 6mm), it will not flex or shake at speed. Very well finished with a fairly smooth surface inside (we use GRP surface mat for a better finish) with our usual attention to details so no air bubbles, cracks, frayed edges etc. Please click More info for further details.

£274.99

Dart fairing kit

ABS plastic small cockpit fairing, finished in high gloss black so no need for further painting if black is your choice. Complete with a pre trimmed and pre-drilled dark tint screen plus it includes a universal fitting kit that uses your existing headlight brackets.

Complete with screen fasteners and a universal fitting kit that bolts to the existing headlight pivot/pegs. Replacement screens and fitting harware available individually if required.

Fits on 7" or smaller headlight. Excellent value for money and a economical alternative to the larger cockpit and top fairings, it still provides a degree of wind protection and looks good in the process.

Ideal for BMW models fitted with the smaller 7" headlight such as the R45/65 Series but can be fitted to the /5, /6, /7 and Monolever models with a bit of ingenuity.

£69.99

Recommended products

Below is a small list of optional/add on items that we compiled to be used with our FlatRacer fairing kits.

We have available for sale many other products that can be associated to our BMW R2v Boxer Cafe Racer fairings, seats and tail kits, such as pre-fitted polished alloy trims, tail lights, mudguards, stainless steel hinges, rubber stops, BMW OEM seat locking spigots, etc, etc.

If you have any specific requirements regarding parts, fit or trim, please do contact us, we will be more than pleased to assist you.

Flatracer Monza & R90S fairing optional headlight acrylic cover

Our optional pre-fitted trademark laser cut 3mm thick headlight acrylic headlight cover.

Fastened in place using zinc plated small angle plates, stainless steel fasteners and rubber washers. We also include our labour for trimming and drilling the fairing itself to accomodate this feature.

This solution provides a degree of protection from road debris and stone chips that can crack the expensive headlight glass. It is an elegant and neat flush aerodynamic solution

A very neat and elegant feature, seldom seen in this type of Cafe Racer fairings.

£34.99

FlatRacer Monza fairing replacement acrylic screen - undrilled

Replacement acrylic screen for the FlatRacer Monza top fairing (&" or 8"), made of clear high quality acrylic sheet and laser cut with precision so smooth and linear edges.

Please note that these are supplied un-drilled and may require further trimming/cutting to fit your particular fairing.

Grey tint colour and/or flip up screens available upon request and at additional cost, please enquire.

£49.99

BMW R90S cockpit fairing replacement acrylic screen

BMW R90S cockpit fairing clear, standard size screen, it will fit all the BMW original fairings and our own replicas. In fact, it fits better on the original fairings than the BMW supplied screens!

Pre-trimmed and pre-drilled for fitting accuracy.

Other options include flip oversize (3"), light or dark grey tint at additional cost, please contact us with your requirements.

£49.99

Dart fairing replacement screen

Screen for the Dart fairing, made of black tint acrylic, high quality and cut with precision to ensure fitting accuracy.

Pre-drilled for your convenience, straight bolt on.

Fitting kit also available separately, please contact us with your requirements

£34.99