Latest projects

BMW R2v Airhead exhausts

MegaTon exhaust silencers

Our most popular exhaust silencer!

Pair of MegaTon reverse cone chrome silencers. It measures 17" (431mm) in lenght, it accepts header manifolds of 1 3/8" to 1 3/4" (35mm to 44.5mm) by using the supplied adaptive collar sleeves. Removable end cone. Quite loud but we do have have sound insulation mats available separately to wrap around the centre baffle if the noise is too much for you. Check below for the sound deadening mat sale listing

Complete with an universal adjustable bracket. Available separately if you so require.

Sold here as a pair. Other silencers available, please click More info.

£94.99

MegaCone exhaust silencers

Pair of high quality chrome steel reverse cone short megaphone silencers. It will accept header manifolds of 45 to 38mm by using the supplied adaptive collars. Slightly longer than the other Mega silencers, total lenght of 19" (483mm).

Not as loud as the MegaTons and non-repackable. Complete with a universal adjustable bracket.

These are among the easiest universal silencers to fit on the BMW R2v twinshock /5 to /7 Series. Also available per unit if you so require.

Sold here as a pair. Other silencers available, please click More info.

£129.99

MegaBlack exhaust silencers

Pair of high quality matt black steel reverse cone short megaphone silencers, similar to the MegaCone above. It will accept header manifolds of 45 to 38mm by use of the supplied adaptive collars. Slightly longer than the other Mega silencers, total lenght of 19" (483mm).

Not as loud as the MegaTons and non-repackable. Complete with a universal adjustable bracket. Also available per unit if you so require.

These are among the easiest universal silencers to fit on the BMW R2v twinshock /5 to /7 Series.

Sold here as a pair.

£129.99

Daytona long exhaust silencers

Pair of high quality chrome Cafe Racer Daytona long megaphone reverse cone exhaust silencers, 26" long (circa 660mm).

Complete with inlet clamps and a Multi reducer set. Inlet 1 5/8" (41.2mm). It will accept header manifolds of 41.2mm, 38mm and 35mm (1-5/8", 1-1/2", and 1-3/8"). Complete with an universal chrome adjustable bracket. Outstanding quality. Also available per unit if you require so. Sold here as a pair.

Long silencers are ideal for standard tune engines, keeping engine torque and tractability, requiring only minor tweaks to carburetion and ignition plus with the added bonus of keeping noise levels down. For those looking for a discreet and sporty exhaust solution.

£129.99

BMW R2v /5 Series exhaust silencers

Excellent quality pattern set of chrome exhaust silencers as fitted to the BMW /5 Series, commonly known as the Cigar shape. These fit exactly as the original items with no modifications to mounting brackets,carburation or ignition. Noise output is comparable to the original silencers. Unbeatable value for money.

Fits the BMW R50/5, R60/5 and R75/5.

Sold as a pair. Please state your bike's model and year when ordering.

We also have for sale top quality stainless steel silencers for the BMW /5 models, please contact us for more details and costs.

£149.99

BMW R2v /6 & 7 Series exhaust silencers

Excellent quality pattern set of chrome exhaust silencers as fitted to the BMW /6 and /7 Series. These fit exactly as the original items with no modifications to mounting brackets,carburation or ignition. Noise output is comparable to the original silencers. Unbeatable value for money.

Fits the BMW R60/6, R75/6, R90/6, R90S, R60/7, R75/7, R80/7, R100/7, R100RS, R100RT, R100S, R100CS, R100T.

Sold as a pair. Please state your bike's model and year when ordering.

We also have for sale top quality stainless steel silencers for the BMW /6, /7 and Monolever models, please contact us for more details and costs.

£149.99

BMW R2v stainless steel exhaust manifold - single balance pipe

Top quality stainless steel set of exhaust manifolds with a single crossover pipe. Designed as a straight replacement for single balance pipe systems commonly found on pre-81 bikes. Tube diameter is 35mm (R45/65) or 38mm, swaged at the ends for the 40mm systems (pre 81 R100)

Manufactured here in UK to the highest standards, it carries a 10 year guarantee, fits exactly as the original items with no modifications to mounting brackets,carburation or ignition. Noise output is comparable to the original silencer. The set is polished to a mirror finish which has a close resemblance to chrome plating.

Please state your bike's model and year when ordering.

£219.99

BMW R2v stainless steel exhaust manifold - twin balance pipe

Top quality stainless steel set of exhaust manifolds with a double crossover pipe. Designed as a straight replacement for single balance pipe systems commonly found on some post-81 bikes. Tube diameter is 35mm (BMW R45/65 pre 1984) or 38mm for most post 81 BMW R80 and R100.

Manufactured here in UK to the highest standards, it carries a 10 year guarantee, fits exactly as the original items with no modifications to mounting brackets,carburation or ignition. Noise output is comparable to the original silencer. The set is polished to a mirror finish which has a close resemblance to chrome plating.

Please state your bike's model and year when ordering.

£249.99

Exhaust silencers baffle re-pack mat (35cm x 1mt)

Exhaust silencers baffle re-pack mat (35cm x 1mt), enough to re-pack two medium sized silencers such as the MegaTons.

Ideally suited for those who with to atone noise levels. Suitable for silencers with removable baffles.

Different widths of 40 and 45cm (length is 1 meter per pack) are also available, please do contact us with your requirements.

£14.99

BMW R2v /5, /6 & /7 exhaust silencers stainless steel angled brackets

BMW R2v /5, /6 & /7 exhaust silencers stainless steel angled brackets.

Excellent replacement for the usually rusty, dented and damaged exhaust silencer angled brackets that secure these to the bike's frame.

Sold here as a pair.

Other accessories available such exhaust manifold clamps, reducer sleeves and other replacement parts including stainless steel fasteners. Please contact us with your requirements.

£29.99

BMW R2v exhaust manifold big rose nuts (pair)

BMW R2v big fin exhaust manifold/cylinder head nuts. Commonly seen in the R69S and later adapted for the early BMW /5 and /6 Series, it can be easily fitted in the later post 1976 bikes (/7, Monolevers and Paralevers, NOT R45/65).

In theory the big fin area can help dissipate quicker the accumulated heat, especially important around the exhast valve seat, the hottest points in any atmospheric engine and in particular air colled engines.

Very good looks and actually easier to grip and remove using the proper exhaust wrench. An excellent replacement for the often damaged, broken and downright tatty nuts.

A small dab of copper grease on its threads is highly advisable for the sake of the poor soul who needs to remove it in the future.

£59.99

BMW R2v exhaust manifold sealing rings (set)

Often overlooked, these metal sealing rings are essential to seal and tighten the exhaust manifolds on your BMW R2v Series.

Brand new, original BMW replacements, sold here as a complete set for the two cylinder heads (two internal and two external rings). Please state your bike model and year when ordering

Other accessories available such exhaust manifold clamps, reducer sleeves and other replacement parts including stainless steel fasteners. Please contact us with your requirements.

£39.99

FlatRacer BMW R2v exhaust nut heavy duty steel wrench tool

Quite often brute force and even chiseling is required to undo these exhaust nuts, especially if in past maintenance has been neglected as some copper grease should be applied periodically.

Having used some of the more common alloy wrenches available on the market with mixed results (we had at least one that broke), we've decided to commission the manufacture of these laser cut, 8mm heavy duty steel BMW exhaust nut wrench tools.

Incredibly strong, sturdy, heavy, capable of whitstanding serious force, it will last for years to come and make light work removing the BMW R2v Airhead exhaust and maintaining these notoriously corrosion prone exhaust nuts.

£29.99