Latest projects

BMW Accessories

FlatRacer BMW Monza deluxe alloy cap kit

BMW R2v Monza tank cap kit, developed by us as a straight swap for the functional but not that attractive flush black BMW cap.

It fits all BMW R2v tanks made after 1976 fitted with screw in caps.

It includes a manually and individually machined alloy adaptor collar, a high quality alloy Monza cap (2 1/2"), fitted with a proper vent and seal plus an original BMW top dust seal and lower grooved o-ring.

The FlatRacer BMW Monza cap kit offers outstanding quality and it is beautifully finished.

Part of our FlatRacer Cafe Racer kits, please click More info for further details.

£119.99

FlatRacer BMW Europa alloy cap kit

FlatRacer BMW R2v Europa tank cap kit, developed by us as a straight swap for the functional but not that attractive flush black BMW cap.

It fits all BMW R2v tanks made after 1976 fitted with screw in, flush black caps.

Made of T6 high quality alloy, it includes a recessed 16mm BMW metal enamel badge, featuring a discreet breather hole. Simple screw in operation, non lockable.

It includes the Flatracer designed alloy adaptor collar, the Europa alloy top cap, including a 16mm BMW enamel badge (not fitted) and seal plus an original BMW top dust seal and lower sealing solid o-ring.

Coming
soon!

FlatRacer BMW K Series aero cap kit

BMW K Series aero tank cap kit, developed by us as a straight swap for the functional but not that attractive flush black BMW cap.

It fits all BMW K75 / K100 and K1100 including the K1 fuel tanks. The FlatRacer BMW Aero K cap kit offers outstanding quality and it is beautifully finished.

It includes a precision machined alloy adaptor collar, a high quality alloy aero cap (lockable with key version to be presented soon), fitted with a proper vent and seal plus all the necessary torx safety (tamper proof) stainless steel fasteners. To be fitted with your existing original BMW cap large rubber seal.

Original BMW seals are available at extra cost, please contact us if you require one.

£159.99

BMW Cafe Racer alloy engine top cover

BMW R2v Airhead engine alloy top cover. Sand cast alloy cover that replaces the orignal starter motor cover and air filter box. Close match to the engine alloy finish and precison machined for accurate fit. Ideal if running carburettor bellmouths / trumpets or conical air filters.

Excellent quality and finish. A very popular option, sporty, sleek and elegant.

Please be aware that you will need to re-route the engine breather hose(s) and relocate the choke lever on pre 81 motorcycles.

£159.99

BMW 70mm alloy badge/emblem

BMW 70mm logo, self adhesive backing. Originally fitted to BMW R2v tanks and S, RS and RT seat cowls and fitted to several of our BMW R2v seats and cafe racer seat / tails kits.

Excellent quality and finish, it can be fitted in a variety of places, including fuel tanks, fairings, seats, etc. Alloy construction, adhesive back.

Other sizes including the 45mm used on our FlatRacer Munchen BMW Cafe Racer tail kits.

Screwed in enamel badges as used on the BMW / and /5 Series fuel tanks are available by special request, please do contact us with your needs.

£7.49

FlatRacer BMW R2v /6 & /7 fork pre-load adjusters

Our new fork pre-load adjusters, made of 304 grade stainless steel and phosphorous bronze, an overkill of engineering. Includes nylon spacers (not shown).

Outstanding looks and quality. It allows fine adjustment of fork pre-load by pre-loading the internal fork springs. This allows to control ride height, control dive and allow for a more firm and stable ride.

Recommended fit with progressive front springs allied to our tubular steel fork brace.

Designed to fit all BMW R2v /6 and /7 Series 36mm forks (1973-1984).

Many other stainless steel parts available, please click More info for further details.

£124.99

FlatRacer BMW stainless steel steering stem top nut w/ enamel badge

BMW R2v stainless steel steering stem/top yoke centre nut, with a hole for the steering damper shaft and a recess inbuilt to accept a brass enamel BMW badge, which is included in this sale (needs to be glued in the correct position once the nut is tightened in place).

Version without the badge also available, please visit our Stainless steel page.

Direct replacement of the original which often is damaged, rounded off and rusty.

Rust proof, good looking and minimum maintenance. Fits all R2v (70-96)

Part of our Full Stainless Steel kit (package deal), please click More info for further details.

£34.99

Stainless steel bar end round mirror

Highly polished stainless steel bar end mirror, to fit onto your handlebars ends. Stylish and practical in the modern traffic world. 4" (101mm) wide.

Fits the most common 7/8" / 22mm bars (standard in the Motorcycle Industry).

Excellent quality and obviouly corrosion proof, no more rust pitting! Universal fitting, fits left or right hand.

Sold per unit.

Other mirrors options available. Please click More info for further details

£39.99

Tarozzi race clip ons

Race clip ons from world famous Italian maker Tarozzi. Outstanding quality and presentation.

Standard BMW R series forks fitment available (please specify your bike model and year), other sizes available upon request.

Please note that your turning circle may be restricted and will need to be adjusted accordingly by the fitting of clip ons.

Other handlebar options available  Please click in More Info for further details.

£114.99

BMW R2v pre 1980 oil temperature gauge/dipstick

BMW R2v Airhead oil temperature gauge/dipstick. Keep an eye on your engine oil temperature. Specially useful if you live in an hot climate or do a lot of city riding.

High quality, glycerine filled gauge WHITE face for accuracy, stability and long working life.

Replaces the standard dipstick, stylish and very accurate, made in Germany.

Fits all the BMW R2v Series /5, /6 and /7 plus early R45/56 models made between 1970 and August 1980 equipped with shallower oil sumps.

Please that no markings are present in this dipstick. You can either mark your own or keep the old dipstick for oil level checking.

£54.99

BMW R2v pre 1980 oil temperature gauge/dipstick - black face

BMW R2v Airhead oil temperature gauge/dipstick. Keep an eye on your engine oil temperature. Specially useful if you live in an hot climate or do a lot of city riding.

High quality, glycerine filled gauge BLACK face for accuracy, stability and long working life.

Replaces the standard dipstick, stylish and very accurate, made in Germany.

Fits all the BMW R2v Series /5, /6 and /7 plus early R45/56 models made between 1970 and August 1980 equipped with shallower oil sumps.

Please that no markings are present in this dipstick. You can either mark your own or keep the old dipstick for oil level checking.

£59.99

BMW R2v post 1981 oil temperature gauge/dipstick

BMW R2v Airhead oil temperature gauge/dipstick. Keep an eye on your engine oil temperature. Specially useful if you live in an hot climate or do a lot of city riding.

High quality, glycerine filled gauge WHITE face for accuracy, stability and long working life.

Replaces the standard dipstick, stylish and very accurate, made in Germany.

Fits all the BMW R2v Series /7 plus later R45/56 models, Monolevers and Paralevers including GS/ST models made after September 1980 equipped with the deeper oil sumps.

Please that no markings are present in this dipstick. You can either mark your own or keep the old dipstick for oil level checking.

£49.99

BMW Bing carburettor alloy trumpets

Newly developed pair of alloy bellmouths / air velocity trumpets, specifically designed for the BING CV 32mm and 40mm carburettors fitted on the BMW R2v Boxer series (please specifiy your model/carb size when ordering).

Outstanding build quality and finish, dazzling looks and a must for race developed engines.

Please note that carburation/ignition tuning may be required. Please also be aware that air filtration will be reduced in comparison to K&N or original paper replacement air filters thus accelerating engine wear.

£89.99

BMW Dell Orto PHM carburettor alloy trumpets

A pair of Dell Orto alloy bellmouths / air velocity trumpets, specifically designed for the Dell Orto PHM38/40 pumper carburettors fitted on the BMW R90S and fitted as a performance upgrade to many other R2v Boxer series (please specifiy your model/carb size when ordering). Outstanding build quality and finish, dazzling looks and a must for race developed engines.

Please note that carburation/ignition tuning may be required. Please also be aware that air filtration will be reduced in comparison to K&N or original paper replacement air filters thus accelerating engine wear.

Optional extra on our Dell'Orto carburettor conversion kit. Please click More info for further details.

£79.99

Classic alloy indicators - brushed finish

Brushed finish cast alloy indicators with an adjustable stem (M8). Approximate measures:

  • Lens size is L 60 x W 30mm
  • Complete indicator length is 120mm
  • Threaded stem length: 25mm (1")
    • Universal fit. Brushed alloy finish with amber lenses. Supplied with 12v 23w bulbs fitted. Hollow stem for discreet wiring so care should be excercised as overtighten it will cause the stem to break. Indicator chrome brackets also available, please check listing below.

      Other indicators available, please click More info.

£19.99

BMW alloy round rocker cover set

A very popular modification on the post 1976 bikes, which had the later black angular shaped covers.

Made in Germany, very high quality alloy casting. Straight fit, no modifications necessary.

Fits all Airhead engines (1969-1996). Complete with new side studs and nuts plus the necessary rocker cover gaskets. 

Sold as a pair.

£94.99

BMW alloy round rocker cover set - chrome

A very popular modification on the post 1976 bikes, which had the later black angular shaped covers.

Made in Germany, very high quality alloy casting with CHROME finish.

Straight fit, no modifications necessary. Fits all Airhead engines (1969-1996). Complete with new side studs and nuts plus the necessary rocker cover gaskets.

Oustanding quality with added bling factor. Sold as a pair.

£139.99

BMW R2v Series /2 and /5 headlight chromed ring trim

BMW Headlight chromed ring trim. A very popular and elegant period accessory on the pre-73 bikes fitted with the smaller headlights such as the BMW R50, R60, R69S, R51 and all /5 Series fitted with the original 6.5" bucket headlight.

Easily fitted to the headlight through its pivot bolts (not supplied), it will protect the headlight and speedo in the event of a fall. Built on a jig for accuracy of fit and chromed for enhanced looks and longevity.

Will NOT fit later and larger 8" headlights as fitted on /6, /7 and BMW Monolever/Paralever models.

£29.99

BMW R2v /5 Series stainless steel side panels

Originally introduced by BMW as an option for the later BMW R2v /5 Series and standard equipment for some USA models.

These side panels are high quality stainless steel stampings, accurate replicas of the original albeit without the black painted stripes.

It fits exactly as per the originals (a rubber band and the four tangs on the rear sub-frame). Fits all /5, /6 and /7 Series (69-84). Very cool and period looking!

Excellent GRP side panels for the later BMW /6 & /7 also available. Please click More info.

£119.99

Cast alloy headlight brackets

High quality polished cast alloy headlight brackets, similar to the old Ceriani types seen in the Sixties.

Will fit forks stanchion sizing from 35mm, 38 and 41mm using the plastic sleeves provided (tweaks required to fit BMW 36 and 38.5mm fork stanchions). We can also supply rubber sleeves at additional cost if required. Side mounting holes of 10mm so most headlights can be fitted.

If fitting a 8" BMW headlight pre 85, you will need to enlarge the LH bracket to 22mm to accept the original pivot bolt or ignition switch barrel. Please contact us for details.

Chrome brackets and headlights also available, please click More info for more options.

£39.99

Clymer BMW R2v Airhead 70-96 manual

Clymer technical manual for the BMW R2v Airhead series 1970-1996.

Covers all BMW Series, from the 1970 on BMW /5 Series to the later R100 GS from 1996, including the /6, /7, R45/65 Series, Monolever and Paralevers, including G/S, GS and ST derived bike models.

High quality product covers all systems, maintenance & repairs.

Hundreds of photos & wiring diagram showing complete disassembly and reassembly of the bike. In our view, the best manual there is for these bikes and easier to use than the rare factory manuals.

£34.99

FlatRacer BMW R2v /7 and Monolever fuel tank cover

FlatRacer BMW R2v /7 and Monolever fuel tank cover.

Heavy duty vinyl fuel tank cover for the BMW R2v /7 Series (76-84) and Monolever models (85-96).

A well tailored and snug fit, it will protect your tank from damage, especially if using a tank bag. It features a flap for access to the fuel tank cap.

Excellent value for money, practical and useful.

£49.99

FlatRacer BMW R2v /6 & /7 fork brace

FlatRacer BMW R2v /6 & /7 fork brace

Designed to fit BMW R /6 & /7 ATE brake system bikes, very sturdy and proven design, will enhance roadholding qualities on your BMW. This tubular brace replaces the original flimsy mudguard mount & provides substantial bracing of the fork legs. Made of thick steel and powder coated for a long life.

Black or silver colours are available, please let us know of your choice when ordering.

Fork braces and stabilisers available for other models. Click More info for further details.

£99.99

Tarozzi indicator chrome clamps

Indicator chrome clamps (pair)

Very useful chrome clamps that be used in any round tube such as fork stanchions, frames, handlebars etc. Sizes ranging from 31-34, 35-38 and 39-42. Please state your choice or contact us for advice.

Used as lower mounts for our BMW R90S cockpit fairing kit and also a good solution to fix indicators to the frame front tubes for the bikes fitted with cafe racer fairings.

19.99