Cafe Racers

Mobile visitors

____________

Our website uses Adobe Flash which may limit browsing on Android and other Mobile devices.

For full browsing and shopping capabilities, please install Adobe Flash Player

Contact us!

Acewell 70mm billet alloy black electronic speedo

Acewell 70mm billet alloy black electronic speedo

Acewell 70mm billet alloy electronic speedometer / tachometer.

An attractive matt black billet alloy conical shaped electronic dgital speedo/tacho unit.

Features:

  • Billet alloy CNC machined pod, 72mm diameter by 58mm depth. MATT BLACK
  • Digital multi-functions in one, displays tachometer, speedometer, odometer, trip and fuel meter simultaneously.
  • 6 LED warning lamps indicators, lights, main beam, oil pressure and neutral
  • LCD has 2 digital rows and analogue RPM bar display w/ blue LED backlight
  • Odometer and total riding timer cannot be reset . Permanently stored in memory
  • Universal tachometer input: CDI or Ignition Coil Signal
  • Displays clock when in standby mode
  • Can be easily switched between Mph & Km/h (248/300 max)
  • Adjustable wheel circumference from 1 to 3999mm
  • Fuel gauge can work with 100/250/510 ohm senders (or off if not required)
  • Fully waterproof
  • Includes bracket, BMW R2v speed sensor and wiring harness
  • Vibration (8G) and mechanical shock (10G) tested
  • EMI / EMS tested, E-Mark certificate
    • Additional information:

       - Bar Graphic Tachometer 12,000 RPM
       - Digital Tachometer and warning RPM 10-19900RPM, 100RPM increment
       - Speedometer KM/H / MPH 2.4-300km/h 187.5mph
       - Trip meter 1 & 2 TRIP 1/2 0.0 - 9999.9 km/miles
       - Odometer ODO 0-99999 km / 0-62490 miles
       - 12 / 24 hour clock 0:00 - 11:59 / 23:59
       - Average Speed AVG 2.4 - 399KM/H (248MPH)
       - Riding Timer RT 0-11H59:59
       - Maximum Speed MAX 2.4 - 399KM/H (248MPH)
       - Total Riding Time TT 0-999999H
       - Bar-Fuel Meter +/- 100/250/510 ohms and off

      This kit includes all the necessary fitting instructions

Acewell 70mm electronic billet alloy speedo unit -
Acewell warning lights bar - 70mm speedos

£189.99

Supplied with a BMW R2v specific speedo sensor. This sensor fits exactly in the same way as the original mechanical sensors off the BMW R2v Airhead gearboxes. You can programme the computer to accept whichever differential ratio your bike might have (33/11, 37/11, 32/10) etc. Other sensors are available including universal fit and for the most popular classic bikes, Honda, Kawasaki, Suzuki, Yamaha at no extra cost. Speed sensors for the latest Hondas, BMW's and Hinckley Triumph are available at additional cost. Please contact us with your specific requirements.

Optional / Recommended products

Below is a list of optional/add on items that we compiled to be used with this item. If you have any specific requirements regarding parts, fit or trim, please do contact us, we will be more than pleased to assist you.

Weatherproof 10 pin connector plug

Weatherproof 10 pin connector plug set.

Very useful weatherproof 10 way connector plug, ideally suited to splice/wire an electronic speedo to a BMW R2v electric harness loom in a professional and safe way.

In order to avoid altering the original loom, we would suggest fabricating new sub-looms or even a new instrument loom from scratch. However, If this is not a viable option, we would recommend that if you are splicing your existing loom to this unit, cut the main harness to the clocks with a generous length remaining on the original plug. This set up will allow you to fit this wiring connector and plug it at later date if the need arises to (you will need two sets). See photo of an altered /5 clock fitted with this plug.

£12.99

Lucas type red warning light

Red warning light.

A very useful Lucas replica 12v warning light that can be positioned on the top yoke, headlight shell or any other convenient place. Simple push in place, secured by small side tabs.

Very useful for the BMW R2v series fitted with Acewell electronic speedos as it allow to retain the charge warning light for the alternator. This is essential in order to "excite" the alternator magnetic fields and for the whole chargin system to operate correctly.

Fits in 1/2" (12.7mm) hole.

£4.99

Lucas type orange warning light

Orange warning light.

A very useful Lucas replica 12v warning light that can be positioned on the top yojke, headlight shell or any other covenient place. Simple push in place, secured by small side tabs.

Very useful for the BMW R2v series fitted with Acewell electronic speedos as it allow to retain the warning light for low brake fluid (Bremsen/Brake failure).

Fits in 1/2" (12.7mm) hole.

£4.99

Acewell electronic speedo fuel sender

Fuel sender of 100 ohm, suitable for the electronic speedos listed above with this function (85, 70, 73 and dash pod units).

Please note that this electronic fuel sender may require modifications to your fuel tank such as cutting, welding and fabrication. It requires a flat bottom section with sufficient height for the sender's correct operation. Please contact us for advice.

The sender has a square base of 55 by 55mm, a maximum operating height of 160 (minimum of 85mm), the float buoy arm has 100m in lenght and the float buoy itself has 50mm in upright length. Please see annexed diagram for reference.

£34.99

Acewell BMW R2v speedo sensor

Acewell BMW R2v speedo sensor.

BMW R2v specific speedo sensor. This sensor fits exactly in the same way as the original mechanical sensors off the BMW R2v Airhead gearboxes. It works by hall effect, as a transducer, sending the correct signal for the Acewell electronic speedo. This allows you to programme the Acewell unit to accept whichever differential ratio your bike might have (33/11, 37/11, 32/10) etc.

Please contact us first for availability as we tend to have a limited number available for separate sale.

£32.99

Acewell mounting bracket - 2 hole

Acewell alloy mounting bracket with two holes.

Similar in concept to the standard one hole bracket but wider and offering two mounting points for additional support and potentially less vibration.

Ideally suited to be fitted centrally between your two handlebar clamps, it allows for handlebar bolt spacing up to 110mm.

It can also be fitted on top yokes or flat dash panels (drilling may be required).

£9.99